Parts Needed to Tow Destination Trailer with 2021 Ram 3500 and TorkLift Everest WDH
Published 09/22/2021 >
Products Featured in This Question
Question:
Pulling a 42 foot destination trailer with my 2021 ram 3500 dually long bed diesel. 2000 lbs tongue weight, 15,000 total trailer weight. I am ordering the TorkLift SuperHitch Everest Weight Distribution System - 30,000 lbs GTW, 3,000 lbs but am lost as to what I need in addition. Will I need a new receiver hitch to utilize TLM9010 or TLM9011? Can you give me a complete list of part numbers needed for this desired setup?
asked by: Michael W
Expert Reply:
Yes. In order to bumper tow a trailer of that size and use a TorkLift Everest system like the # TLWD1000 you'll need to remove the factory hitch and install a dual receiver like the TorkLift SuperHitch Magnum Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" and 2" # TLD1111-30. This dual hitch receiver provides the support needed to tow a trailer with that tongue weight and GVWR.
In addition to the new hitch receiver for your vehicle, the SuperHitch Magnum does not come with a hitch ball or weight distribution shank. For the shank you'll want to use either the # TLM9010 which can give you up to 12-1/2" of drop, or you could use the # TLM9011 if you need up to 17-1/2" of drop to keep the trailer level. You'll also need a hitch ball with a 1-1/4" shank diameter, so I recommend using the 2-5/16" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Raw Finish - 30,000 lbs # C40085.
These parts, when used together, will give you everything you need to tow your destination trailer.
Product Page this Question was Asked From
Adjustable Shank for TorkLift SuperHitch Everest Weight Distribution - 12-1/2" - 30,000 lbs
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 2900 lbs TW
- Fits 2 Inch Hitch
- SuperHitch
- TorkLift
more information >
Continue Researching
- Q&A: Recommended Weight Distribution System For Torklift SuperTruss Extension
- Q&A: Can the TorkLift Everest Weight Distribution System Be Used w/ a SuperTruss Extension?
- Q&A: Weight Distribution for Use with 48 Inch SuperTruss Extension and 1,000 Pounds Tongue Weight
- Q&A: How to Figure Weight Capacity When Using a Hitch Extender or Extra Long Ball Mount
- Q&A: Comparing Roadmaster And Hellwig Anti-Sway Bars For A 2007.5 Dodge Ram 3500
- Q&A: Does 36" SuperTruss Extension Need TorkLift Hitch on 2018 GMC Sierra 3500
- Q&A: Highest Capacity Hitch and Weight Distribution System for a 2021 Chevy Silverado 3500
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Our Team Picked The Best Camping Gear of the Year - Here Are Their Top Choices
- Article: How to Mount a Truck Bed Camper
- Article: How to Measure for Trailer Hitch Drop
- Article: Tow Dolly vs Flat Towing vs Trailer Towing

