View Cart
Adjustable Shank XL for TorkLift SuperHitch Everest Weight Distribution - 17-1/2" - 30,000 lbs

Adjustable Shank XL for TorkLift SuperHitch Everest Weight Distribution - 17-1/2" - 30,000 lbs

Item # TLM9011

lowest price pledge

Retail:$392.99

Our Price: $372.99

You Save: $20.00
Accessories and Parts

This item qualifies for Free Shipping

Shipping Weight: 56 lbs

Quantity: 
In Stock, Ships Today
Accessories and Parts TLM9011 - Fits 2 Inch Hitch - TorkLift
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Videos


  • Weight Distribution
  • Shanks
  • Fits 2 Inch Hitch
  • TorkLift
  • 2000 lbs TW
  • 20000 lbs GTW
12-3/4" Long shank has 1" bolt holes so that you can mount the head of your TorkLift SuperHitch Everest weight distribution system. Designed for use with TorkLift SuperHitch dual-receiver hitches. Call 800-298-8924 to order TorkLift accessories and parts part number TLM9011 or order online at etrailer.com. Free expert support on all TorkLift products. Guaranteed Lowest Price and Fastest Shipping for Adjustable Shank XL for TorkLift SuperHitch Everest Weight Distribution - 17-1/2" - 30,000 lbs. Accessories and Parts reviews from real customers.


  • All Info
  • Reviews (1)
  • Q & A (16)
  • Videos (1)
  • Photos
  • Why etrailer?

TorkLift Accessories and Parts - TLM9011

12-3/4" Long shank has 1" bolt holes so that you can mount the head of your TorkLift SuperHitch Everest weight distribution system. Designed for use with TorkLift SuperHitch dual-receiver hitches.


Features:

  • Sturdy shank slides into your TorkLift SuperHitch dual-receiver trailer hitch to provide a mounting point for your Everest weight distribution head
  • Adjustable design allows for drop or rise to fit your application
  • Powder coated steel is sturdy and corrosion resistant
  • Hitch pins and clips or hitch locks sold separately
  • Made in the USA


Specs:

  • Application: SuperHitch 2" x 2" dual trailer hitch receivers
  • Weight capacity: 30,000 lbs
  • Overall length: 12"
  • Shank height: 17-1/2"
  • Bolt hole diameter: 1"
  • Distance between center of adjustable bolt hole to center of bolt hole: 1-1/2"


M9011 Tork Lift Magnum XL Adjustable Shank for Super Hitch Everest Weight Distribution System - 12-3/4" Long



TLM9011 Installation InstructionsInstallation Details TLM9011 Installation instructions



Video of Adjustable Shank XL for TorkLift SuperHitch Everest Weight Distribution - 17-1/2" - 30,000 lbs


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for TorkLift Weight Distribution TLM9011 Review

Today we're going to review part number TLM9011. This is the TorkLift Adjustable Shank XL for the TorkLift SuperHitch Everest weight distribution, has a 20,000-pound weight capacity. This extra-long sturdy shank right here will slide into your TorkLift SuperHitch Dual Receiver. This provides a mounting point for your TorkLift Everest weight distribution head. The adjustable design right here with the holes right here allows for a drop or a rise. I have it right now in the drop position.

If you flip this over, you can put it in the rise position. This will fit whatever application you need. These height adjustment holes are 1-1/2" apart center-to-center. This shank is a black powder coated steel, which is very sturdy and corrosion-resistant. Now the hitch pins that are used to hold this into place are hitch locks. They are sold separately on our website.

The application on this is for SuperHitch 2" by 2" dual trailer hitch receivers. In other words, this would slide into the dual hitch receiver. The weight capacity, again, is 20,000 pounds, has a 2,000-pound tongue weight capacity. The overall length from here to here, I'm going to try to give you a measurement on this. As you can see, it's going to be right at 12".

The shank height, which is going to be from the very bottom to the very top, I'm going to try to show you that. Put that at the bottom. If we pull up 1:39, you can see it's going to be right at 17-1/2". These bolt hole diameters right here are going to be 1". Now I do want to make a note that this is designed to work exclusively with the TorkLift's 20,000-pound weight distribution system. It comes with the 1" holes instead of industry standard 3/4" holes, so these holes are only designed to be used with TorkLift's own weight distribution system.

That should do it for the review on part number TLM9011, the TorkLift Adjustable Shank XL for TorkLift SuperHitch Everest weight distribution system. .


Customer Reviews

Adjustable Shank XL for TorkLift SuperHitch Everest Weight Distribution - 17-1/2" - 30,000 lbs - TLM9011

Average Customer Rating:  5.0 out of 5 stars   (1 Customer Reviews)

12-3/4" Long shank has 1" bolt holes so that you can mount the head of your TorkLift SuperHitch Everest weight distribution system. Designed for use with TorkLift SuperHitch dual-receiver hitches.

- TLM9011
by:

I received the hitch as requested. Very heavy duty with good weld beads. It's exactly as described on website. Received on date promised. Thank you 317007


1
1

Ask the Experts about this TorkLift Accessories and Parts
Do you have a question about this Accessories and Part?


  • Recommended Weight Distribution System for a 15,000 lb Box Trailer
  • I do have a solution for you but unfortunately you do have to use a TorkLift XL Shank like part # TLM9011 along with the SuperHitch on your tow vehicle to be able to use the Everest Weight Distribution System # TLWD1000. If 15,000 lbs is the GVWR (gross vehicle weight rating) of your trailer or that is the most it will weigh when you are towing it then you can potentially use the Strait-Line # RP66075 instead. This is rated to tow up to a 17,000 lb trailer and it has a tongue weight...
    view full answer...

  • Recommended Weight Distribution System for a 15,600 GTW Car Hauler
  • To determine the correct Weight Distribution (WD) system for your application you will first need to find what your Total Tongue Weight (TTW) is. Your TTW can be found by adding the Tongue Weight (TW) of your fully loaded and ready-to-tow trailer along with the weight of any cargo behind the rear axle of your tow vehicle. You will then want to pick a system that has a TW range that your TTW falls in the middle of. Keep in mind that your trailer TW should be 10-15% of your loaded trailer...
    view full answer...

  • Recommended Shank or Over-Under Conversion for Level Towing with Blue Ox Weight Distribution System
  • Since you have the Blue Ox SwayPro Weight Distribution Shank for 2" Hitches - 9" Long - 7 Hole Adjustment # BXW4000 and are still nose high, I would normally recommend the Blue Ox SwayPro Weight Distribution Shank for 2" Hitches - 9" Long - 9 Hole Adjustment # BXW4002 to give you a total 4-1/2 inch drop whether using round bars or trunnion bars. The issue is that shank is only rated for 1,500 lbs. The only shank rated higher is the Gen-Y Torsion Weight Distribution Shank - 2" Hitches...
    view full answer...

  • Trailer Hitch and Accessories for Towing a 25,000 Pound Trailer with a 2002 Ford F-350 Dually
  • First, you will need a trailer hitch that is capable of the weight of your trailer with the dozer on it. The only hitch that will fit your 2002 Ford F-350 and has the capacity is TorkLift hitch # TLF1002-30. In order to get it to its maximum capacity (30K) you would have to use the Everest weight distribution # TLWD1000. Then you would need a shank, # TLM9010 or # TLM9011, and a ball, # C40085. Then the only problem is the coupler on the trailer. If it is a lunette ring or pintle...
    view full answer...

  • Weight Distribution System for a 2006 Ford F-350 and 14,000 Pound Work and Play 34 WRS Trailer
  • A single sway control bar is only good for trailers up to 6,000 pounds and up to 25 foot, 11 inch long trailers so that is at least part of the problem you are having. But not to worry because it is a problem that is easily remedied with the proper weight distribution system. To choose a weight distribution system you will need to go by the total tongue weight of the set up. This is calculated by taking the tongue weight of the trailer, when loaded and ready to tow, and adding to that...
    view full answer...

  • Does 3000-Tongue Weight Capacity On TorkLift SuperHitch Require Both Receiver Openings
  • I called my contact at TorkLift and asked about the tongue weight for their SuperHitch Magnum Trailer Hitch Receiver, part # TLD1108-30. The overall weight capacity and tongue weight capacity is for the entire hitch and not just one receiver. To be able to get to the 3000-lb tongue weight capacity would require both receiver openings. The only weight distribution system we offer that can handle 3000-lbs tongue weight is the TorkLift SuperHitch Everest, part # TLWD1000. Using this system...
    view full answer...

  • Weight Distribution for 15,000 Pound Amped Trailer and 2012 Ram 3500
  • To choose a weight distribution system you will need to go by the total tongue weight of the set up. This is calculated by taking the tongue weight of the trailer, when loaded and ready to tow, and adding to that the weight of anything loaded behind the rear axle of the tow vehicle. A trailer that weighs 11,000 pounds would have a tongue weight around 1,100 to 1,650 pounds (10 to 15 percent of the gross trailer weight). Using a 1,200 pound system is not recommended because even unloaded...
    view full answer...

  • Recommended Weight Distribution System for 16,000 lb Equipment Trailer
  • For your 2016 Ford F-350 Diesel, I recommend removing your factory hitch and installing the TorkLift SuperHitch Magnum Trailer Hitch Receiver # TLF1002-30. This is a confirmed fit for your truck and really the only way to get your weight distribution compatible with that trailer size at the bumper. Then you will use the TorkLift SuperHitch Everest Weight Distribution System # TLWD1000 with Adjustable Shank XL for TorkLift SuperHitch Everest Weight Distribution # TLM9011 or # TLM9010...
    view full answer...

  • TorkLift SuperHitch Magnum Trailer Hitch Receiver Fit on 2015 Ram 5500
  • I spoke with my contact at Torklift and he confirmed that TorkLift SuperHitch Magnum Trailer Hitch Receiver # TLD1103-30 is a fit for your 2015 Ram 5500 cab and chassis. This hitch comes with both a 2-1/2" receiver and 2" receiver on the same hitch so you can tow a trailer and carry a bike rack simultaneously. You will be able to haul up to 30,000 lbs if you also use TorkLift SuperHitch Everest Weight Distribution System, # TLWD1000. I have included a product demonstration video of this...
    view full answer...

  • Can TorkLift Everest Weight Distribution be Used with a SuperTruss Extension
  • You have purchased the TorkLift SuperHitch Magnum # TLF1008-30, SuperTruss extension # TLE1548, 7-Way extension # TLW6548, ball # C40085, Everest weight distribution system # TLWD1000, and shank # TLM9011. The hitch and SuperTruss extension along with the 7-Way extension are compatible with each other. The shank, # TLM9011, is compatible with the Everest system, # TLWD1000. But the shank is not compatible with the SuperTruss extension. You can use the Everest system with the shank...
    view full answer...

  • Recommended Weight Distribution System For Dump Trailer With I-beam Frame
  • The best way to determine what system will work for you is to know what your total tongue weight is. The total tongue weight is the tongue weight of your fully-loaded-ready-to-tow trailer added to the weight of any cargo you place behind the rear axle of the tow vehicle. You will then want to find a system where your total tongue weight falls near the middle of the tongue weight range for the system. Getting a system that is too small will be useless, but getting a system that is too big...
    view full answer...

  • Weight Distribution Hitch for 35-foot Toy Hauler with Tongue Weight Near 2000-lbs
  • The key to selecting a properly-rated weight distribution system, one that will deliver the correction required without resulting in a jumpy or erratic ride quality, is to determine the trailer's tongue weight when it is fully loaded with all toys, equipment, supplies, etc, just as it will be when you hit the road. A system that is too soft will not deliver the weight re-distribution to your tow vehicle's front end; a system that is too stiff can result in odd handling characteristics,...
    view full answer...

  • Weight Distribution System Needed for a Trailer with a Tongue Weight of 2,300 lbs.
  • If the loaded tongue weight (TW) of your trailer is around 2,300 lbs then any weight distribution (WD) system that is rated for a max of 1,200 lbs TW will not be strong enough to help out at all. Check your TW to ensure that it is 10-15% of the loaded weight of your trailer. If it isn't you need to move stuff around until you achieve the 10-15% area. If it is already 10-15% of the loaded weight of your trailer then the only WD system that we have that will help is the TorkLift SuperHitch...
    view full answer...

  • Recommended Weight Distribution System to Tow 19K TW Toy Hauler With a 2017 Ram 3500
  • Since your current Tongue Weight (TW) is 1,900 lbs the Reese Titan Weight Distribution (WD) Shank # RP54977 will not be compatible since it is only rated for 1,700 lbs. Keep in mind that the TW of your trailer needs to be 10-15% the weight of your loaded trailer. You will also want to make sure that the Total Tongue Weight (TTW) of your setup falls in the middle of the weight range that your WD system has. Your TTW can be found by adding the TW of your fully loaded and ready-to-go trailer...
    view full answer...

  • What Hitch Ball to Use with TorkLift SuperHitch Magnum for 30,000 lb Weight Rating
  • To be able to achieve the max 30,000 lbs towing/3,000 lb tongue weight rating of the TorkLift SuperHitch Magnum Trailer Hitch Receiver # TLC1205-30 on your 2006 Chevy Silverado you actually need to use TorkLift SuperHitch Everest Weight Distribution (WD) System # TLWD1000. The Everest only comes with the WD head, arms, and clamps so you also need either the adjustable shank # TLM9010 (12-1/2" length) or # TLM9011 (17-1/2" length) as well as the 2-5/16" Hitch Ball # C40085. Please...
    view full answer...

  • Which Torklift Weight Distribution Shank Works with Reese WD Heads
  • I checked with Torklift and the # TLM9000 and # TLM9001 are designed to fit the standard weight distribution systems like your Reese. It has the 3/4 inch holes and the distance between them of 1-1/4 inches. Some of the Torklift shanks use larger diameter holes and would not work with a Reese head but this one does. The part # TLM9011 is an example of a shank that would not work with a Reese head.
    view full answer...


Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Written by:
Lindsey S
Expert Research:
Michael H
Installed by:
Jeff D
Updated by:
Adele M
Photos by:
Zach O
Updated by:
Sarah W

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!

Call 800-298-8924