Can MORryde Wet Bolt Kit be Used with Lippert Equa Flex Equalizers

Question

Question:

Will the morryde UO12-016 work with lippert equa-flex? 7000lbs tandem axle

asked by: Tim S

0

Expert Reply:

Yes the MORryde Suspension Upgrade Kit for Tandem Axle Trailers Wet Bolt Kit # MR46ZR that you referenced is compatible with the Lippert Equa Flex equalizers like you have on your 7k tandem axle trailer.

expert reply by: Jameson C

0

Answer 1

Hey Bekzod, So while we don't have a way of knowing the exact leaf springs for your Arctic Wolf 5th wheel trailer, I can help you determine the correct replacements. You do have to take a measurement, though it's pretty easy, as all you need…

view full answer...

Answer 2

The MORryde Wet Shoulder Bolt #MR52HR and Lippert Equa-Flex Wet Shoulder Bolt #LC126197 are identical in in size. The only difference I can see is the one comes from MORryde while the other comes from Lippert. Both have a length under head of…

view full answer...

Answer 3

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 4

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 5

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 6

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 7

Hi Chas, The Lippert Road Armor Shock Absorbing Equalizer part #LC53CK may work for your trailer, but that will depend on what equalizer is currently on your trailer. In order to determine what equalizers would be a fit for your trailer, we'll…

view full answer...

Answer 8

The Lippert Equa-Flex #LC145546 is the closest cushioned equalizer from Lippert to fitting your Grand Design 2800BH. This particular kit is rated for 5K-8K axles. The MORryde CRE3000 #MR27ZR is going to be the best option for your camper. While this…

view full answer...

Answer 9

Hi Greg; I wish there was a way for me to know the correct parts for that 2023 Coachmen Catalina but we don't have a way to look it up. The only company that lists their parts like that is Grand Design. If they can get out to their trailer and…

view full answer...

Answer 10

Hello Lanny, thanks for reaching out. The CRE 3000 is already a pretty good suspension system, but if you want to upgrade, the first thing that comes to mind are the AllTrek 4000 equalizers. They have more rubber than the CRE 3000, 40% more, so you…

view full answer...

Answer 11

Yes, axle spread and wheel base by definition are the same measurements. You will measure from the center of one axle to the center of the 2nd axle to determine what you axle spread is. This may be difficult as some wheels and covers will make this…

view full answer...

Answer 12

Despite what the manufacturers of these equalizers say, the axle/wheel spacing isn't the right way to figure out the best fit for upgraded equalizers, including the MORryde CRE3000. The wheel spacing is more of a guideline, so to determine the…

view full answer...

Can MORryde Wet Bolt Kit be Used with Lippert Equa Flex Equalizers

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching