Tandem Axle Teardrop Trailer Fender For 15 Inch Wheels & Bearings For 3,500 lb Axle

Question

Question:

Do you sell individual double axle fender? And also can you tell me which bearings would be correct

asked by: Scott K

0

Expert Reply:

The teardrop style of fender is only available as a pair, so for your tandem axle trailer with 15 inch wheels, the teardrop style is the Tandem Axle Teardrop Trailer Fenders - Rounded Edges - Steel - 14" to 15" Wheels - Qty 2 # HP94VR.

In regards to the bearings, since you have 3,500 lb axles, the correct option is the Bearing Kit # BK2-100.

For grease I recommend the LubriMatic Disc/Drum Brake and Wheel Bearing Grease # L11390, along with Bearing Packer # PTW1218.

expert reply by: Kyle S

0

Tandem Axle Teardrop Fender
(click to enlarge)

Trailer GVWR/Tire Sticker
(click to enlarge)

Answer 1

The Tandem axle trailer fender set part #HP54VR that you referenced would be the best as it's the closest to the dimensions you have as it measures 65" long x 9" wide x 15" tall. I attached an install video for this for you to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 4

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 5

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 6

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 7

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 8

Hey Donny! For your Dometic Penguin/Brisk Air 15,000 BTU AC model B59516.711C0-MX, the correct soft start is the #DMC93JF. This is designed for Dometic Brisk II electronic air conditioner units with in-wall thermostats.

view full answer...

Answer 9

Hey Robert, yes the Kodiak disc brake calipers part #KDBC225DAC that you referenced will replace the Tie Down calipers you have now 46304, they can be used as a left or right hand caliper and does come with ceramic brake pads. If you ever needed…

view full answer...

Answer 10

Hello Kirt, thanks for reaching out. The Fulton Single Axle Trailer Fenders #F008595-2 are the closest thing we offer to the Ez-loader 250-023712-10 fenders you are looking for. The Fulton #F008595-2 fenders are gray in color and they are…

view full answer...

Tandem Axle Teardrop Trailer Fender For 15 Inch Wheels & Bearings For 3,500 lb Axle

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching