Connecting To The Reverse Wiring Circuit For A 7-Way Blade Connection On A 2008 Honda Ridgeline

Updated 09/04/2021 | Published 09/03/2021

Products Featured in This Question

Adapter 4 Pole to 7 Pole and 4 Pole w/Test Lamps

(315)

$47.21

Hook Probe Circuit Tester

(70)

$12.41

Roadmaster Brake-Lite Relay Kit for Towed Vehicles

(774)

$43.90

Question:

Recently purchased a 7 pin adapter from your company. I would like to connect the back up lights for a RV trailer. What color wire on the vehicle do I need to connect to the yellow wire on the adapter? I’ve connected the 12v black wire to the battery using a 30A/12V inline circuit breaker. Are there instructions to add the solenoid to control the lights on my adapter?

asked by: Stephen L

Expert Reply:

The reverse wire on your 2008 Honda Ridgeline appears to be the green wire with a black stripe that goes into your tail lights. Be sure to use a Test Light # PTW2993 to verify this before taping into the wire.

You can use the Roadmaster Brake-Lite Relay Kit # RM-88400 to protect the vehicle wiring by using a relay to power the trailer lights through your Curt Adapter 4 Pole to 7 Pole # C57674. Using the wiring diagram that I have attached you will substitute the brake light connections for the reverse light connections on your Ridgeline.

Green wire from relay to green/black reverse light wire
White wire from relay to ground connection
Red wire from relay to 12 volt power battery connection
Black wire from relay to yellow wire of Curt 7-way adapter.