What Replacement Hitch Pin Do I Need for My Kuat Transfer V2 for a 1-1/4" Hitch?

Question

Question:

Im also having alignment issues- I did not get a 3/8 hitch pin. How do I obtain one for a 1-1/4" hitch?

asked by: Rod A

0

Expert Reply:

For a replacement hitch pin for your Kuat Transfer V2 for a 1-1/4" hitch, you will need the Hitch Lock for Kuat Bike Racks - 1-1/4" Hitches # HL1. This particular pin has a diameter of 3/8 on an inch and an overall length of 5-3/4 inches.

expert reply by: Bob C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 3

Hey Claudia, I checked with Curt just now and confirmed that their hitch part #C64DR does fit all models of the 2026 Toyota Corolla Cross which includes the hybrid models so it would work great for you. We also had customers with similar hybrid…

view full answer...

Answer 4

Hey Doug, I checked with Curt and their hitch part #C58VV is a confirmed for all models of the 2026 Lexus RZ350e including the electric model so it would work great for you. Do you have a bike rack already? What kind of bikes do you have?

view full answer...

Answer 5

The Hollywood Racks Trail Rider 2-Bike Rack #HR200 weighs about 35 lbs. The Swagman XC 2-Bike Rack #S64650 is lighter at about 26 lbs. The biggest difference between the two is the Swagman rack is rated for 2 bikes at 35 lbs each and the Hollywood…

view full answer...

Answer 6

Hey Michael, congrats on the new SUV. The EcoHitch item #EH87CR does not require you to remove the rear bumper assembly when installing. It does require some slight fascia trimming though. You'll have to remove a 2-3/4” deep and 4-1/2” wide…

view full answer...

Answer 7

The Swagman XTC4 4-Bike Rack #S64665 and Hollywood Racks Destination 4-Bike Rack #HR4000 are two of the best values in regards to 4-bike racks, and when taking everything into consideration I highly recommend the Destination #HR4000. There are a…

view full answer...

Answer 8

Hey Gregory, thanks for reaching out. Yes the Curt #C13195 hitch is exactly what you'll need for carrying a few bikes on the back of your 2020 Hyundai Santa Fe. it has a 2" receiver and 750 lb tongue weight capacity so 4 bikes will not be a…

view full answer...

Answer 9

Hello Andrew, Well that sounds like quite the fun trip, what state or states will you be traveling through? You're asking a really important question, especially since you're planning a cross-country trip with about 250 pounds of bikes and…

view full answer...

Answer 10

Hey Chris! The Hollywood Racks CrossTrack Bike Rack part #HLY98RR already comes with a hitch lock so no need to get one separately! There is also an integrated cable lock to wrap around your bikes as well. The CrossTrack is expandable so that you can…

view full answer...

Answer 11

Hello Lou, thanks for reaching out. The hitch pin you are looking for is the etrailer D-Shape Anti-Rattle Locking Hitch Pin for Benton Hitch Accessories #e43JR. This will work with the Benton #B54VR bike rack you mentioned, as well as the #B54FR,…

view full answer...

Answer 12

It sure will Nick! The closest portion of the Benton ShiftShow Bike Rack item #B56VR is 8-3/8" away from the hitch pin hole. We've taken a few measurements off of hidden hitches installed on 2023 Grand Cherokee's and the hitch pin hole…

view full answer...

What Replacement Hitch Pin Do I Need for My Kuat Transfer V2 for a 1-1/4" Hitch?

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching