All Parts Needed to Tow With 2011 Lexus RX 350 Without Factory Tow Package
Question:
Hello couple of days ago I bought a tent trailer 3300lb Can my 2011 lexus rx 350 pull with proper hitch installation stuff you mentioned about that I needed to get. Trailer needs to be connected to the hitch in term of break pad. And all the other electric wire stuff like harness. Etc....I need advise please thank you
asked by: Sadaf
Expert Reply:
Your 2011 Lexus RX 350 is able to tow a camper, though all capacities should be verified in your copy of the owner's manual, as the vehicle manufacturer has the final say. With that said, we can get you set up with everything you need in order to tow with your '11 Lexus RX 350, which I do assume doesn't have the factory tow package since you mentioned needing wiring.
I'll list out everything you need for your '11 RX 350, which is a hitch, wiring, and brake controller as it sounds like your camper has electric brakes:
- Draw-Tite Max-Frame Trailer Hitch Receiver # 75676
- T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118478
- Universal Installation Kit for Trailer Brake Controller # ETBC7
- Draw-Tite I-Command Trailer Brake Controller # 5535
- Brake Control Harness # 20127
- Curt Slim Adjustable 2-Ball Channel Mount - 2" Hitch - 3-3/4" Drop, 3-1/2" Rise # C46KR
I like the Draw-Tite hitch because it has the best clearances for your Lexus, and for the wiring, we have found the Tekonsha harnesses to be the most reliable. The # ETBC7 will give you the 7-way and rest of the components needed to install the brake controller, and for that the I-Command is the best option as it gives you great value with its combination of quality at an excellent price point. You'll need the brake control harness to complete the wiring, and the ball mount will fit your hitch and give you the rise or drop needed to attach your trailer.
I have added a number of links below to video reviews for you to check out as well if you'd like to take a look.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 400 lbs TW
- 4000 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Concealed Cross Tube
- Draw-Tite
more information >
Curt Slim Adjustable 2-Ball Channel Mount - 2" Hitch - 3-3/4" Drop, 3-1/2" Rise - 10K
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- 2 Inch Ball
- 2-5/16 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Matte Black
- Drop - 3 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- Anti-Rattle Shank
- CURT
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Replacement Brake Control Plug-In Harness for Tekonsha and Draw-Tite Brake Controller 12" Long
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Universal
- Draw-Tite
more information >