Which Replacement Mounts Do I Need for My Thule T2 Pro?

Question

Question:

Hi, for this part, I am having a hard time finding the right one. I think we have a Thule T2 Pro XTR 9034. It seems like we have a less common earlier model where the mounting bolts are closer together. Can you get me the measurement of the mounting plate? Its the section in the attached photo. Thank you

asked by: RJ B

0

Expert Reply:

I went ahead and called my contact at Thule and he confirmed that as long as you have the older Thule T2 Pro XT or the newer Thule T2 Pro XTR, the part number you need for the replacement mounts is either # 7524703001 (for the tray nearest to the vehicle) or # 7524703002 (the tray furthest from the vehicle).

expert reply by: Bob C

0

Answer 1

The upright arm on the Thule T2 Pro XTR Bike Rack for 2 Bikes part #TH83JV can be replaced yes, that said you must buy this as an assembly with the tray. The Replacement Spar Tube Assembly for Thule T2 Pro XT part #7524703001 for the one closest to…

view full answer...

Answer 2

There is a replacement shank/stinger for the Thule T2 XTR with the part #TH37MY but the one for the Classic would not work on the XTR.

view full answer...

Answer 3

I spoke with Swagman and they let me know that the Replacement Shank for Swagman XTC4 4-Bike Rack #SP329 measures 14" overall and is made from 1/4" steel. Since you're looking for a bit longer receiver bar, I recommend going with the…

view full answer...

Answer 4

The tube you need for your Thule T2 Classic Bike Platform Rack is part of the backbone. You will have to purchase the entire backbone assembly in order to get the tube you need. The part you need is the Replacement 2" Hitch and Backbone Assembly…

view full answer...

Answer 5

We do have the replacement spar assembly for your Thule T2 Classic bike rack, though it is a different part than what you mentioned, as that is a part for the T2 Pro XT. Instead, the correct spar for the T2 Classic is the following: - Replacement…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Which Replacement Mounts Do I Need for My Thule T2 Pro?

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching