Trailer Hitch Recommendation for 2017 Toyota Sienna

Question

Question:

Hi, I will be ordering the E98853 for my 2017 Toyota Sienna. Please let me know if this is the best one.

asked by: Felicia K

0

Expert Reply:

The etrailer hitch part # e98853 is the best trailer hitch option for your 2017 Toyota Sienna as it's mostly hidden, has the best towing capacities, and has a matte finish which makes it a little less visible as well. I attached an install video for more info for you to check out as well.

expert reply by: Jameson C

0

Answer 1

You are correct that both the etrailer.com Class III Trailer Hitch #e98853 and the Draw-Tite Max-Frame #76112 feature the same hidden-crosstube design that allows only the 2" receiver to be seen on the vehicle. This is typically the style I…

view full answer...

Answer 2

Yes the etrailer hitch part #e98853 does fit your 2017 Toyota Sienna SE.

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The trailer wiring harness I recommend for your 2015 Toyota Sienna SE AWD is the Tow Ready T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #118498. This wiring harness installs in line with your vehicle's factory wiring behind the…

view full answer...

Answer 5

The benefit to a non-powered trailer wiring harness is that it's a bit easier to install since you don't have to run a wire up to the battery of the vehicle. The advantage to a powered kit is that it does a better job protecting the taillight…

view full answer...

Answer 6

Yes, the etrailer.com hitch part #E98853 that you referenced does fit your 2013 Toyota Sienna all wheel drive. I attached an install video for this hitch for more info for you to check out as well! Then for wiring the kit I recommend is the Tekonsha…

view full answer...

Answer 7

Hi Peter! The Tekonsha wiring harnesses are the most reliable on the market, so the T-One #118648 is a great choice for your 2018 Toyota Sienna XLE Limited AWD. The Draw-Tite #76112 will also fit your Sienna, but our etrailer #e98853 is a little less…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Thank you for the photos! The T-One Vehicle Wiring Harness #118498 you purchased is for a 2016 Toyota Sienna SE, but the connectors you have in your photos look like you have a non-SE model so you'll need the Curt T-Connector Vehicle Wiring…

view full answer...

Answer 10

I can absolutely help with choosing a trailer hitch for your 2020 Toyota Sienna that will give you the best ground clearance. There are quite a few hitch options available for your vehicle, but the models that will sit highest off the ground when…

view full answer...

Answer 11

Both the Curt #C13382 and the etrailer #e98912 hitch are a 2" Class III hitch receiver that will provide a maximum gross trailer weight of 3,500 lbs and a maximum tongue weight of 525 lbs. You are correct, they are an identical hitch but our…

view full answer...

Answer 12

Hey Daniel thanks for all the questions! One of them is going to be pretty easy but also disappointing, every hitch for your 2019 Toyota Sienna is going to require the panel to be removed, trimmed, then reinstalled. This is actually not as hard to do…

view full answer...

Trailer Hitch Recommendation for 2017 Toyota Sienna

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching