Set up: Draw-Tite Max-Frame Trailer Hitch Receiver on a 2017 Toyota Sienna Video

You are certainly correct that there are quite a few trailer hitches available that are confirmed to fit your 2018 Toyota Sienna. In addition to the manufacturer, these hitches primarily differ in their weight capacities and how they actually mount…

The hidden trailer hitch I recommend for your 2020 Toyota Sienna is the Draw-Tite #76112 because it is the only hitch of the three that is rated for use with a weight distribution system like the Fastway e2 #FA92-00-0600, which not only speaks to its…

I recommend installing the EcoHitch Trailer Hitch Receiver #EH39FR for your 2023 Tesla Model Y and here is why: Both the Draw-Tite #DT58MR and the EcoHitch #EH39FR install behind the bumper and have a really clean appearance, but the main difference…

It's not a dumb question, no worries. Our install difficulty ratings are based on a scale of 1 through 10 with 1 being a very simple install that just about everyone could handle with no difficulty and 10 being very difficult, something probably…

Hey Daniel thanks for all the questions! One of them is going to be pretty easy but also disappointing, every hitch for your 2019 Toyota Sienna is going to require the panel to be removed, trimmed, then reinstalled. This is actually not as hard to do…

Thank you for the photos! The T-One Vehicle Wiring Harness #118498 you purchased is for a 2016 Toyota Sienna SE, but the connectors you have in your photos look like you have a non-SE model so you'll need the Curt T-Connector Vehicle Wiring…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The benefit to a non-powered trailer wiring harness is that it's a bit easier to install since you don't have to run a wire up to the battery of the vehicle. The advantage to a powered kit is that it does a better job protecting the taillight…

The trailer wiring harness I recommend for your 2015 Toyota Sienna SE AWD is the Tow Ready T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #118498. This wiring harness installs in line with your vehicle's factory wiring behind the…

Yes the etrailer hitch part #e98853 does fit your 2017 Toyota Sienna SE.

The etrailer hitch part #e98853 is the best trailer hitch option for your 2017 Toyota Sienna as it's mostly hidden, has the best towing capacities, and has a matte finish which makes it a little less visible as well. I attached an install video…

Yes, the etrailer.com hitch part #E98853 that you referenced does fit your 2013 Toyota Sienna all wheel drive. I attached an install video for this hitch for more info for you to check out as well! Then for wiring the kit I recommend is the Tekonsha…