Correct Braking Assemblies For Dexter 4400lb Axle Made In October of 2008
Updated 08/05/2021 | Published 08/02/2021
Products Featured in This Question
Question:
I have a 2010 Keystone Outback 270BH trailer with two 4.4K axles. The axle # is 1113477481. Can you tell me if this axle was built before or after May 1, 2009. And what brake assemblies would it take? Thanks
asked by: Michael H
Helpful Expert Reply:
I reached out to my contact at Dexter and based on the serial number you provided your axle was made in October of 2008 and will use braking assemblies # 23-455 for the passenger side, and # 23-454 for the driver side.
I included videos of the products mentioned for you to take a look at.
Product Page this Question was Asked From
Dexter Electric Brake Assembly for 4.4K Axles Manufactured Before May 2009 - 10" - Right Hand
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 3500 lbs
- 4400 lbs
- Brake Assembly
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Dexter Brake Assemblies for 36-19 Assemblies
- Q&A: Replacement Hub/Drums for Dexter 4,000 lb Axles
- Q&A: Replacement Parts For Dexter D40 EZ Lube 4,000LB Trailer Axle # 7369991
- Article: Trailer Maintenance Schedule
- Q&A: Replacement Hub Drum for Hayes 8k Trailer Axle
- Q&A: Parts Needed to Tow a Trailer w/ Brakes w/ a 2021 Jeep Grand Cherokee L
- Q&A: No Trailer Connection on Tekonsha P3 Brake Controller 90195 on a 2000 Toyota Tundra
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Can I Power the etrailer A-Frame Jack Through the 7 Way to Pull Power from Towed Battery?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Wiring Diagrams
- Article: Testing Trailer Brake Magnets for Proper Function