How To Measure For Oval Shaped Sink

Question

Question:

Can you tell me how I measure my sink to replace it. It is brand new and had a hole in it when delivered and no response from dealer. It cracked in 4 spots.

asked by: Jody G

0

Expert Reply:

Simply measure from the widest point on length and width. Please note the attached images showing width and length measurements for the LaSalle Bristol Single Bowl RV Bathroom Sink - 15-3/4" Long x 12-1/4" Wide - White, # 34416166PW.

expert reply by: Michael R

0

34416166PW_002
(click to enlarge)

34416166PW_001
(click to enlarge)

000001
(click to enlarge)

000002
(click to enlarge)

000003
(click to enlarge)

Answer 1

The depth of the LaSalle Bristol Single Bowl RV Bathroom Sink part #34416156PWA interior is 6" deep, the exterior is 6-3/4" deep. I have attached a diagram of all of the dimensions for your reference.

view full answer...

Answer 2

Even though the LaSalle Bristol Single Bowl RV Bathroom Sink - 15-3/4" Long x 12-13/8" Wide #34416166PW technically works, you will need to make sure you have a big enough cutout/space to accommodate for the extra 1-3/4" of length and…

view full answer...

Answer 3

The LaSalle Bristol, #34416166PW is close to those measurements being 15-3/4" Long x 12-13/8" Wide. You will not need to have exact matching measurements for it it work. You will need for the counter cut out to be large enough for the bowl…

view full answer...

Answer 4

You can convert surge brakes to an electric over hydraulic braking system. To do this, you will need an electric over hydraulic actuator and a brake controller. For an electric over hydraulic actuator, I recommend looking at the Carlisle HydraStar…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

How To Measure For Oval Shaped Sink

Product Page this Question was Asked From

Continue Researching