JT's Strong Arm Compatibility With Snap Pads On Electric Travel Trailer Stabilizers

Question

Question:

Can the JT Strong arm system be used with electric stabilizers and RV Snap Pads?

asked by: Mary A

0

Expert Reply:

Yes, the JT's Strong Arm Jack Stabilizer Kit for Travel Trailers # LC191025 can be used on electric stabilizers. The Electric Stabilizer Jack Pad Adapter # LC314597 will allow you to attach the Strong Arms to the jack pad. These adapters can be either bolted on or welded on to stabilizers.

They will not interfere with the SnapPad XTRA Jack Pads # SN99FR or other pads that you have and are specific to your travel trailers stabilizers.

expert reply by: Bud M

0

Answer 1

Since your scissor jacks are at a 45 degree angle, the best option is to add a support like an angle iron or unistrut for the braces of the JT's Strong Arm Jack Stabilizer Kit for Travel Trailers #LC191025. Just make sure the support is properly…

view full answer...

Answer 2

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Hey Adam, we have just what you are looking for with the B and W fifth wheel rail kit part #BWRVK2402 which is a confirmed fit for your 2017 Ford F-250 and is the industry standard rail design which means it will fit the hitch you have. This is a…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Hey Tim, we do have other options as well that fit the 2.5 inch hitch size like with the Weigh Safe True Tow part #WS59MR which your tongue weight would work great with and comes with a shank that can do a drop of up to 6 inches. This also has a…

view full answer...

Answer 8

Hi Seth! The B&W Patriot 5th Wheel Trailer Hitch w/ Slider - Dual Jaw - 18,000 lbs #BWRVK3270 will fit any industry standard rails (also referred to as ISR) perfectly, but there are technically a few rails out there that it will not fit. Those…

view full answer...

Answer 9

Tony, that's a great question, and you're absolutely right to double-check before ordering. Yes, etrailer part #PD69RR is the Progressive Dynamics PD9345V converter charger. The PD69RR number is our internal etrailer part number, while…

view full answer...

Answer 10

Hello Sean, Thanks for writing in. For a replacement hardware kit you will want to order the Replacement Hardware Kit for Trailer Hitches #RHK. Above "ADD TO CART" you will need to put "Curt C15410" so the warehouse knows what…

view full answer...

Answer 11

Hey Aaron, welcome back! Since your 2017 Ford F-250 has 5th wheel rails installed you've got a wide range of options. The Demco Autoslide 5th Wheel Trailer Hitch item #DM8550035 you were looking at would definitely work. This is the Cadillac of…

view full answer...

Answer 12

Hello Danny, I’m really glad you mentioned the Equalizer! When sway is the issue, that one and the Weigh Safe are definitely my go-to options. They both have 4 point sway control, with straight spring bars and frame brackets. They can be a little…

view full answer...

JT's Strong Arm Compatibility With Snap Pads On Electric Travel Trailer Stabilizers

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching