Replacement Grease Seal for an Old 6906 S National Oil Seal
Updated 07/01/2021 | Published 06/30/2021
Products Featured in This Question
Question:
6906 S That is the grease seal number I am trying to replace. I have been unable to find any with that part number it is a old late 70s early 80s boat trailer 4 lug hub thank you
asked by: April D
Expert Reply:
From what I could find, the 6906 S was made by National Oil Seals, but is no longer produced. However, it is almost identical to the TruRyde Double Lip Grease Seal # 34823 and is just off by the very slightest measurements. The 6906 S measures 1.25" inner diameter and 1.972" outer diameter. The # 34823 will measure 1.249" inner diameter and 1.983" outer diameter. It will be a tight fit, but it will work
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44643
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.00 Inch I.D.
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Best Replacement Brakes for a 7,000 lbs Axle
- Q&A: What is Difference Between Trailer Bearings L44649 vs L44643
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Can 12" Dexter Axle 6K Electric Trailer Brakes Be Replaced By 12" dexter Axle 7K Brakes
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: Can I Use the MORryde Add-A-Step with the Lower Hand Rail Kit on My MORryde Steps?
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: How to Determine Correct Replacement Hub for Coleman Pop-Up Camper
- Article: Trailer Wiring Diagrams
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Is It Illegal to Leave My Hitch on My Truck?