Recommended Replacement Camera To Replace Discontinued Voyager VOM7SN-WIN  

I took a look at your Voyager WiSight RV Observation Camera - Wireless #WVH100 and the Replacement Voyager WiSight 2.0 Wireless RV Backup Camera Monitor #ASA27FR you mentioned you have, and it actually does not appear that these two are compatible…

Unfortunately the Monitor WVOM541 for your WVHS541 has been discontinued and is no longer available. You will need to replace your entire camera and monitor with the Voyager WiSight 2.0 Wireless RV Backup Camera System #ASA57YR. The new monitor and…

If you were told your trailer was pre-wired, there would be a mounting plate and plug that would allow you to just connect a plug-in camera system. If that mount and plug is not there, I wouldn't assume the wires are there, though you can…

We do have a back-up camera that has a 7" monitor included. - Voyager WiSight 2.0 Wireless RV Backup Camera System w/ Night Vision #ASA57YR I am not completely sure what camera system you currently have but you can still use your current…

Absolutely; the Voyager WiSight backup camera you referenced will work on your trailer even though it is not pre-wired. The correct part number for the camera system is the following: - Voyager WiSight 2.0 Wireless RV Backup Camera System #ASA57YR…

I spoke with Voyager about the Voyager Monitor WV0S511 and they informed me that this is no longer available and there is no direct replacement for this that will allow you to use your existing camera/cameras. Therefore, it will need to be replaced…

What I would recommend is a backup camera installed at the rear of your horse trailer that has night vision so that you can see what's beyond the glare and the trailer you mentioned. For that the Furrion RV Observation Camera System w/ Monitor…

For your 2021 Winnebago 2108DS pre-wired for a Voyager back-up camera I recommend the Voyager WiSight 2.0 Wireless Backup Camera System #ASA37YR. This wireless backup camera system is designed for RVs/Travel Trailers with factory-installed Voyager…

There isn't an adapter to connect the wiring of a Furrion camera to a Voyager. With that said you can pretty easily just cut the connectors off and then connect to the camera since it's only two wires.

The Voyager WiSight 2.0 Wireless Backup Camera System part #ASA24YR (WVSXP43 ) is what replaced the WVHS43 so you can be rest assure you are getting the newest, most up to date system from Voyager.

Since your current camera only says Voyager that means it is going to be the 1st generation. The WiSight 2.0 Camera #ASA74YR has Voyager 2.0 on the camera. So you are going want a new system with either the 4.3" Monitor #ASA24YR or 7"…

Since your trailer has the bracket #FRCBRKT-BL that would mean your trailer has the Furrion pre-wiring which is very common for newer RVs. The part #FOS43TASF is a fit for this and would be a really easy install. This gives you a monitor with a 4.3…