Color Of Soler Black Fade Awning When Closed  

When choosing the slider you want to measure the outside front of box width including the flange. Then you need to select a slider that extends a minimum of 2-1/2 inches beyond each side of the box width. For example, the Black Solera Slider…

Since your Solera awning didn't come with the roller tube pre-built to accommodate a light strip, the best thing for your application is to go with the Vista Light LED Kit #LC25VR. This installs where the awning attaches and will actually work…

Yes, the Replacement Short Arm Assembly for RV Awnings part #LC404523 is correct for a Solera V000436372 Awning.

The Solera Awning Rail Extrusion - Black - 8' #LC715217 has mounting holes that are about 1/4" in diameter. The Self-Tapping Screw - 1/4" -14 x 3/4" #FA1131822 is the recommended screw for this and you will also need LaSalle…

For RV's that have laminated siding with decent density, there frequently is no backing installed. Awnings such as the Solera Smart Arm 12V Power RV Awning, #LC517517 are screwed into the siding using self-taping screws. Other times the awnings…

Thanks for the picture of your awning arm sticker. Based on that the correct replacement arm assembly is the part #LC404523 that you referenced.

Here is a list of all the Lippert Level Up replacement jacks we offer. Currently this is the only way Lippert offers their jacks and they do not offer a rebuild kit for these. Replacement Lippert Level Up Hydraulic Jack - Silver - 8,000 lbs -…

It sounds like you're looking for some enhancements to help improve the ride quality in your 2014 Thor ACE 30.1 Motorhome. If this is the case I highly recommend starting with the Roadmaster Reflex Steering Stabilizer #RM-RBK22-RSSA, which is a…

If the pitch adjustment isn't staying in place for your Solera Smart Arm 12V Power RV Awning #LC517505 then you'll need to adjust the bolt (B) in the center of the joint to tighten up this function. Attached is a photo showing the location of…