New Brakes For Horse Trailer
Updated 06/22/2021 | Published 06/16/2021 >
Products Featured in This Question
Question:
Greetings, Looking for a new brake system to repair a stock horse trailer. See pictures attached, I believe this needs a typical 15inch backing plate, can you confirm? What other information do you need? Would the following be what I need: Dexter Trailer Hub and Drum Assembly for 9K to 10K Axles - 8 on 6-1/2 - Oil Bath - Before July 2009 Item # K08-288-90 Qty 4 Dexter Electric Trailer Brake Assembly - Self-Adjusting - 12-1/4inch - Left Hand - 9K to 10K Item # 23-450 Qty 2 Dexter Electric Trailer Brake Assembly - Self-Adjusting - 12-1/4inch - Right Hand - 9K to 10K Item # 23-451 Qty 2 Based on what you see on the pictures, do you recommend changing the back of the hub and drum assembly as well? Would this include the axle part where you install the bearings/hub/drum?
asked by: Andres C
Helpful Expert Reply:
It does appear you have the correct parts listed for your project, depending on how far you want to take the R&R.
Dexter Trailer Hub and Drum Assembly for 9K to 10K Axles, # K08-288-90. Qty 4
Dexter Electric Trailer Brake Assembly - Self-Adjusting, # 23-450. Qty 2
Dexter Electric Trailer Brake Assembly - Self-Adjusting, # 23-451. Qty 2
Regarding "...do you recommend changing the back of the hub and ..." that is difficult to tell from your attached images. If you simply have typical surface corrosion and grim then I would not.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 9K to 10K Axles - 8 on 6-1/2 - Oil Bath - Before July 2009
- Trailer Hubs and Drums
- Hub with Drum
- Oil Bath
- 387A / 25580
- Standard Grade
- For 9000 lbs Axles
- For 10000 lbs Axles
- 5/8 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Solution for Needing Replacement Caliper for Kodiak 204 Caliper
- Q&A: Determining Replacement Hub And Bearings For Dexter P-12 SLR Trailer Axle
- Q&A: Looking For Replacement MasterPro 581750 Hubs On A Yacht Club Pontoon Trailer
- Q&A: Replacement Trailer Hub Assembly for Dexter 8-248 Hubs
- Q&A: Replacement Parts for Dexter Motorhome Axle 8-133
- Q&A: Replacement Hub and Drum for a Dexter 8-133
- Q&A: Replacement Bushing For Dexter 5-Leaf 10,000 Pound Axle Slipper Spring DX45QR
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Parts Required to Add Electric Over Hydraulic Drum Brakes to a Trailer
- Article: Gooseneck to 5th Wheel Adapters
- Article: Trailer Wiring Diagrams
- Article: Double-Eye Trailer Suspension System Review
- Article: Dealer Spotlight - Croft Trailer and Hitches




