bing tracking image

Review of Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - K08-288-90

content loading

Customers compare K08-288-90 to these similar products




Products Featured in this Video



Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - K08-288-90 Review


Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at the Dexter oil bath trailer hub and drum assembly with the 8 on 6 1/2 inch bolt pattern for the 9,000 to 10,000 pound axles that are manufactured before July of 2009. Now this trailer hub and drum assembly provides the surface area for your brake shoes to grip when the brakes are activated, and this is compatible with both electric and hydraulic drum brakes. Now this one is an oil bath design. So it'll let you check the lubricant level without disassembling the hub like on a greased hub and drum, basically, once this cap is installed, you'll be able to look through this oil cap to check the lubrication. Now, this part will include everything laid out here on the table.

We'll start with the bearings. It includes the inner bearing, which is part number 307A, and then the outer bearing, which is part number 25580. Now the bearing races that these will ride in, they're already pre-installed into the hub and drum. The oil seal is included, it's part number 10-51. The oil cap we mentioned comes with the plug and the O-ring all ready to install and it's part number RGO 4-270.

Comes with this wheel retaining ring part number 33-52-1, and then eight of the 5/8 inch size 90-degree cone wheel lug nuts, part number 6-109. The hub and drum itself is a sturdy iron construction. It is made in the USA. Few specs, again, we mentioned the application for this is 9,000 pounds and 10,000 pound general-duty Dexter axles. And it is designed to work with axles that are manufactured before July of 2009.

The bolt pattern on this is 8 on 6 1/2 inches. The wheel bolt size is 5/8 of an inch. And the weight capacity on this hub and drum is 5,000 pounds. But that should do it for the review on the Dexter oil bath trailer hub and drum assembly with the 8 on 6 1/2 inch bolt pattern..


Questions and Comments about this Video

Info for this part was:

Employee Jeff D
Installed by:
Jeff D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.