What Ladder Rack will Work with My BAKFlip MX4 Tonneau Cover on My 2019 RAM 1500?

Question

Question:

I currently have a BAKFlip MX4 Hard Tonneau Cover installed on my 2019 Ram 1500 Crew cab.............Is there a rack that will work with this tonneau cover? Thanks

asked by: Doug S

0

Expert Reply:

For a compatible ladder rack that works with the BAKFlip MX4 Hard Tonneau Cover - Folding - Aluminum - Matte Finish # BAK448227 (for the 5-1/2 foot bed without Rambox) and # BAK448223 (for the 6-1/2 foot bed without Rambox), I recommend the Adarac Custom Truck Bed Ladder Rack - Steel with Aluminum Crossbars - 500 lbs # A70450 (for 5-1/2 foot beds without Rambox) or the # A70480 (for 6-12 foot bed without Rambox). Since the BAKFlip MX4 attaches inside of your bed's rails, the Adarac Custom ladder rack will mount unobstructed into the truck's stake pockets. If you need straps to secure your cargo onto the rack, I recommend the SmartStraps Ratchet-X Ratchet Tie-Down Straps w/ S-Hooks - 1" x 14' # 348345.

expert reply by: Bob C

0

Answer 1

The BAKFlip MX4 Hard Tonneau Cover #BAK48203 on your 2023 Ram 2500 short bed will work best with the Adarac Pro Rack System #A24JG, but unfortunately this doesn't have an over-the-cab piece. If you really need that over-the-cab part then…

view full answer...

Answer 2

I have the perfect solution for you with the TruXedo Elevate Truck Bed Rack System #TX46NV. It's compatible with your BAKFlip MX4 tonneau cover and the towers adjust to either 18" or 28" tall. It has multiple mounting points for the…

view full answer...

Answer 3

We have just what you're looking for. You can use the etrailer J-Style Kayak Carrier - Folding - Universal Mount #e98878 on the Adarac Pro Series ladder rack similar to the #A4002965 that fits on the 2020 GMC Sierra 1500 with a 5-3/4 foot bed.…

view full answer...

Answer 4

Hey Lisa, we have the Thule Hull A Port part #TH849000 which comes with T-slot install hardware and would work great on your Elevate ladder rack. What kayaks do you have?

view full answer...

Answer 5

Your Adarac Ladder Rack has crossbars too big for any kayak racks that clamp on a crossbar. However, it does have a channel you can use to mount the kayak carrier. The Malone SaddleUp Pro Kayak Carrier with Tie-Downs for Truck Racks - Saddle Style -…

view full answer...

Answer 6

I did some research on these Victory 4x4 and Prinsu roof racks. These are not brands that we carry here but based on what I can see online, their racks use 2" x 1" rectangular crossmembers. A Malone J-style carrier like the J-Pro2 #MPG117MD…

view full answer...

Answer 7

For your Adarac Custom Truck Bed Ladder Rack, like the Steel #A70490, that you have installed on your Ford F-150, I recommend using the Thule Hull-A-Port Kayak Carrier #TH834. The Adarac crossbars on the systems we have available for your truck…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

What Ladder Rack will Work with My BAKFlip MX4 Tonneau Cover on My 2019 RAM 1500?

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching