Does the Phoenix USA Rear Wheel Center Cap Fit a 22.5" Alcoa Rim

Question

Question:

Does this cover fit a 22.5 Alcoa rim

asked by: James H

0

Expert Reply:

The Phoenix USA Rear Wheel Center Cap, part # PXQ1020L, fits 8-1/4" hubs and 8 on 275mm bolt patterns. If these match the specs on your rim, this will fit.

It looks like there are several bolt patterns available for the 22.5" Alcoa rims. If you let me know the bolt pattern, I can tell you definitely if this will work for you or recommend a different one if it doesn't. I've linked to an article we've written to help you measure your bolt pattern.

expert reply by: Kef G

0

Answer 1

The Phoenix USA Rear Wheel Center Cap - 8-1/4" Hub Diameter - Center Hole Mount - Right Thread #PXQ2020XL fits the rear motorhome wheels that has a hub diameter of 8-1/4 inches and a bolt pattern of 10 on 285 millimeters. When it comes to the…

view full answer...

Answer 2

The lug nut covers part #WM9005-6 that you referenced fit on lug nuts by pressing onto them. These would fit 33 mm lug nuts. A lot of times people use the lug nut pliers part #WM8211 to install and remove them. Your rim cover would have it's own…

view full answer...

Answer 3

You will need either the Phoenix USA Rear Wheel Center Cap Right Hand Thread #PXQ2010XL or Left Hand Thread #PXQ2010L if you have a 6-1/2" wide hub. Otherwise you will need the Right Hand Thread #PXQ2020 or Left Hand Thread #PXQ2020L if you have…

view full answer...

Answer 4

Hey Jason, it sounds like you're looking for the Wheel Masters Lug Nut Covers #WM9005-6. These are going to be the same 33mm jam nuts you're looking for and is sold in a set of 6.

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 10

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6 inch whereas the 225/75-15 fits widths that are 5 inch to 6-1/2 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 11

Hey Donny! For your Dometic Penguin/Brisk Air 15,000 BTU AC model B59516.711C0-MX, the correct soft start is the #DMC93JF. This is designed for Dometic Brisk II electronic air conditioner units with in-wall thermostats.

view full answer...

Answer 12

Hi Craig! Thanks for the pictures! ^___^ The Americana Aluminum Trailer Wheel - Split Spoke - 15" x 6" Rim - 5 on 4-1/2" #AM63FV is very very similar to the Sendel T03 wheel. To the point of not being able to tell them apart, to be…

view full answer...

Does the Phoenix USA Rear Wheel Center Cap Fit a 22.5" Alcoa Rim

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching