Can Roadmaster RM-910030-6 6-Pin Be Used to Replace 4-Pole Trailer Connector

Updated 05/06/2021 | Published 05/05/2021

Products Featured in This Question

RoadMaster 6-Wire Connectors - Trailer and Vehicle Ends

(49)

$33.45

Pollak 6-Pole, Round Pin, Trailer Wiring Socket - Vehicle End

(171)

$10.06

RoadMaster 6-Wire Trailer Connector - Trailer End

(44)

$19.02

Question:

I keep bending pins on the cheaper 4 flat connectors. Want something much more heavy-duty. Can I use one of these and just wire 4 pins instead of 6?

asked by: Gregg

Expert Reply:

You could certainly do that if you wish, but if durability is what you're primarily concerned with, I'd use the
# PK11609 die-cast socket along with the # RM-910030-8 plug, versus the plastic 6 pin plug provided with the # RM-910030-6 plug you'd looked at. The metal socket would withstand abuse better than the plastic socket.

One thing to keep in mind, if you wire the vehicle and trailer this way, you'll have an issue if you ever try to to that trailer with another vehicle. You might be better off using a more robust connector like # W787264 for a 4 foot cable, # W787268 for an 8 foot cable or # W787270 for a 10 foot.

The Hopkins # HM38134 Easy-Pull is also a good choice, it's ergonomic design makes it easy to get a good grip without damaging the connector.

expert reply by: Mike L