Will the Hydraulic Trailer Brake Kit part # AKFBBRK-35 Work With 13" Wheels
Question:
The video indicates it fits a 13 wheel, but the spec do not call it out, will if fit a 13inch wheel? Also, do I need to buy matching drums, or use my old surge brake drums?
asked by: Dick
0
Expert Reply:
The wheel size compatibility comes from the hub/drum, but in short, yes, the Hydraulic Trailer Brake Kit part # AKFBBRK-35 works with 13" wheels. It is designed for a hub/drum 10" diameter x 2-1/4" wide which is measured inside the hub on the wear surface.
expert reply by: Conner L
0
Product Page this Question was Asked From
Hydraulic Trailer Brake Kit - Uni-Servo - Free Backing - 10" - Left/Right Hand - 3,500 lbs
- Trailer Brakes
- Hydraulic Drum Brakes
- Camper
- Car Hauler
- Utility Trailer
- Free Backing
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Similar Expert Q&A Pages
- Mounting Hardware to Use with Trailer Brake Assemblies AKFBBRK-35
- Putting Brakes On A 16 Foot Flatbed Trailer That Did Not Come With Brakes.
- Can Hydraulic Drum Brake Assemblies be Replaced with Free-Backing Plates
- How to Measure Brake Drums
- Recommended Hydraulic Brake Replacement on a 2007 Master Tow Dolly
- Can Surge Trailer Brakes Compensate for Lighter and Heavier Trailer Weights
- What is the Bolt Spacing for etrailer Hydraulic 10 Inch Trailer Brake Kit # AKFBBRK-35
- Can Electric Brakes Be Added To a M1162A Military Trailer
- Recommended Hydraulic 10 Inch Brake Assemblies With Aluminum Brake Cylinders for Boat Trailer
- Is Hydraulic Trailer Brake Kit # AKFBBRK-35 Sold in Pairs
- Replacement Bearings, Races, Grease Seal and Hydraulic Drum Brakes For a 2006 EZ Loader Boat Trailer
- Parts Needed to Add Hydraulic Disc Brakes to Load Rite 3,500 lb Trailer
- Is the Hydraulic Trailer Brake Kit # AKFBBRK-35 Compatible With Dexter 8-247 Hubs
- How Do I Determine Which Hydraulic Brake Assemblies to Use on My Trailer
- Converting Hydraulic Brakes to Electric Brakes on a Boat Trailer
- Can the Same Hub and Drum Assembly be Used for Hydraulic and Electric Drum Brakes
- Replacement Hydraulic Braking Assemblies for Master Tow Dolly with 3,500 Lb Axle
- Comparing Single and Dual Servo Hydraulic Drum Trailer Brakes
- When Would Free Backing Trailer Brake Assemblies be Needed on Trailer
- Availability of Hydraulic Trailer Brake Kit Without Mounting Studs
- Comparing Different Hydraulic Trailer Brakes for Boat Trailer
- Replacement Brake and Hub and Drum Kit for Dexter 3,500 lb Axles
- Replacement Hydraulic Surge Brake Brake Assembly
- Timbren Heavy-Duty Axle-Less Trailer Suspension with 2,000 lb Capacity and Matching Hubs
- Correct Replacement for Tru-Ryde Hub/Drum RVD-H-545
- 3,500LB Hubs, Brakes and Spindle Needed For a 5 on 5-1/2" Bolt Pattern
- Hydraulic Disc Brake Hub Bolt Pattern Options Available
- Free Backing Hydraulic Brakes for a 3,500 Lb. Axle
- Replacement Brakes and Bearings for 1993 Mastercraft Boat Trailer