For LaSalle Bristol XTRM Roof Membrane, Either Side Can Be Glued Down

Question

Question:

Which side gets glued down ?

asked by: Craig S

0

Expert Reply:

I checked with my roof installer, and got a hold of a sample of the LaSalle Bristol # 3441700534142711435 myself, and found out that either side can be glued down. There is no up or down. Both sides are identical.

This membrane is glued down with # 344270341415 adhesive.

I have attached a video of an installation. Be sure to order the correct length.

expert reply by: Les D

0

Answer 1

Hey Nick, thanks for reaching out. Yes, the Replacement Fabric for etrailer Powered RV Awnings #e96QV will work with other brands of awning like Solera or Dometic which are what we commonly see on campers like your 2011 Forest River Cherokee 29U. The…

view full answer...

Answer 2

You could remove the roof to fix the staples but that would require a ton of work and can be costly, which is why Alpha said it would be overkill. You could just hammer the staples back down and just use some self leveling sealant like the Alpha…

view full answer...

Answer 3

The LaSalle Bristol XTRM EXP 90 Adhesive for RV Roofs #344270341415 must be applied to a clean and porous surface. So you will not be able to apply the adhesive to itself. You must either sand the surface clean or apply the new roof sheathing.

view full answer...

Answer 4

Most slides have EPDM rubber roofs but because EPDM is rubber it requires treatment each year to keep it soft and prevent shrinkage. You could replace it with TPO which is another synthetic rubber that will last longer than the EPDM. The smallest…

view full answer...

Answer 5

Yes, the LaSalle Bristol XTRM Adhesive #344270341415 can be laid over Eternabond.

view full answer...

Answer 6

The LaSalle Bristol XTRM roof membrane like part #344270341415, is 27 MIL which makes it about 0.68 mm thick. This is not a kit and is just the membrane. For the rest of the components to install the membrane you'd need the part #AL63FJ and…

view full answer...

Answer 7

The MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat #MA00-05100K that you referenced runs on 12 volts and draws 5 amps max. If your DC outlet can handle 5 amps then this would work but it would be right at the limit.

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 10

Hey Donny! For your Dometic Penguin/Brisk Air 15,000 BTU AC model B59516.711C0-MX, the correct soft start is the #DMC93JF. This is designed for Dometic Brisk II electronic air conditioner units with in-wall thermostats.

view full answer...

Answer 11

Hi Rick, LaSalle Bristol's roof membrane is made of PVC which is known to be durable and offer better protection against punctures and overall weathering. Alpha Systems offers TPO roof membranes that are more environmentally friendly/recyclable…

view full answer...

Answer 12

Hello Paul, There is one thing I like to have when I'm out enjoying the wilderness, and that's a toilet that feels like I'm at home. Well, I found just that for you. Since you're replacing the Dometic 300 in your 2021 Winnebago Minnie…

view full answer...

For LaSalle Bristol XTRM Roof Membrane, Either Side Can Be Glued Down

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching