Recommended Wire Clamps To Keep Interior LED Wiring In Boat Trailer Secure
Updated 03/24/2021 | Published 03/22/2021
Question:
Is there some type of wire holder that would go on the inside of a boat trailer to hold wires for led lights that would run on the inside of the trailer to light up the underneath section?
asked by: Scott R
Expert Reply:
I recommend the CE Smith Trailer Wiring Clips - Frame Mount - Zinc Plated Steel - Qty 10 # CE16867A which will clip to any supports inside of your boat trailer and keep the wiring for your LED lights nice and clean.
If there is spots you are needing a holder but there is no area for the clip to attach I recommend using some silicone to hold the wires in place.
I included a video of the # CE16867A for you to take a look at.
Product Page this Question was Asked From
CE Smith Trailer Wiring Clips - Frame Mount - Zinc Plated Steel - Qty 10
- Electrical Tools
- Cable Management
- Wire Clips and Clamps
- Silver
- CE Smith
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Will 5" and 4-3/8" Yates Ribbed Wobble Roller Fit CE Smith Universal-Fit Split Panel Brackets
- Q&A: Can You Recommend a Spare Tire Mount that is NOT a Stake Pocket Mount?
- Article: Trailer Wiring Diagrams
- Article: Trailer Lighting Requirements
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: How Large of a Wire can I use with Large Body Chassis and Frame Clip - SWC9042-1
- Q&A: Universal 7-Way Trailer Connector to Use on a Custom Trailer
- Q&A: Availability of Red 328 LED Bullet Clearance Side Marker
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Can You Switch From Hubs/Drums to Idler Hubs On a Boat Trailer with 3,500 Lb Axle
- Q&A: Recommendation To Replace Drum Hubs With Idler Hubs
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)