Will Curt 8 Hitch Extender Work With Towing 3500lb Boat With 2020 Ford Expedition?
Updated 03/17/2021 | Published 03/13/2021 >
Products Featured in This Question
Question:
I bought the 8 inch Curt hitch extension from you. I trailer my Nitro 19 ft Bass Boat with my 2020 Ford Expedition. The boat motor and trailer comes in at 3500 lbs. Will I have any issues towing the boat......thanks
asked by: Gysgt M
Helpful Expert Reply:
Thank you for your business!
The Curt Hitch Extender for 2" Hitch Receivers - 8" Long # C45791 you purchased has a maximum tongue weight rating of 350lbs, and a maximum trailer weight rating of 3500lbs, but also reduces the capacities of the trailer hitch receiver installed on your 2020 Ford Expedition by 50%.
As long as your trailer hitch receiver has a 7000lb or higher towing capacity, and your boat trailer does not exceed 350lbs tongue weight or 3500lbs trailer weight you will not have an issue.
If you find your capacities are reduced below 3500lbs then I recommend using an extra long ball mount like the Brophy Ball Mount for 2" Hitch - 3/4" Rise, 2" Drop - 13-1/4" Long - 10,000 lbs # BM20 which will give you the extra length you are needing while not reducing the capacities of your receiver.
With this option you will need a hitch ball with a 1" shank diameter like the 1-7/8" # C40002, 2" # 40038, or 2-5/16" # BWHB94001 to match the coupler on your trailer.
I included videos for each of the products mentioned for you to take a look at.
Product Page this Question was Asked From
Curt Hitch Extender for 2" Hitch Receivers - 8" Long
- Hitch Adapter
- Hitch Extender
- Bike Racks
- Cargo Carriers
- Hitch Mounted Accessories
- Trailers
- 8 Inch Extension
- Fits 2 Inch Hitch
- 3500 lbs
- CURT
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Can Swagman E-Spec Pro Bike Rack be Used at Rear of Travel Trailer
- Q&A: Hitch Pin-to-Ball Center Distance for the etrailer # e38TV Ball Mount
- Q&A: What Hitch Extension Is Best For 2021 Chevy Silverado LT With Lance Truck Camper?
- Q&A: Long Ball Mount Shank Or Extension To Tow MDC XT19 RV With Ford Short Bed Truck
- Q&A: Bike Rack for Lectric XP4 750 On Motorhome Flat Towing Jeep
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Q&A: Extended Ball Mount Option for Tailgate Clearance on a 2024 Ford F350 with 2 1/2 Inch Hitch
- Article: How to Measure for Trailer Hitch Drop
- Article: What is an RV-Approved Bike Rack? (And Do You REALLY Need One?)
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: Steel vs. Aluminum Ball Mounts
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Install E-Track in 3 Easy Steps
- Article: Hitch Anti-Rattle Devices: The Ultimate Guide



