Determining Correct MORryde Rubber Suspension Upgrade Kit For 2008 Keystone Raptor W/ Triple Axles

Updated 03/12/2021 | Published 03/09/2021

Products Featured in This Question

MORryde Rubber Suspension Upgrade for Triple Axle Trailers - 33" Wheelbase - 5.2K to 7K

(48)

$1291.00

MORryde Rubber Suspension Upgrade for Triple Axle Trailers - 35" Wheelbase - 5.2K to 7K

(48)

$1362.09

Question:

Need help on which morryde shackles and wet bolts I need for my 2008 keystone raptor toy hauler, triple axel. Will I need to measure? And does it come with a bushing to replace the middle hole on the hanger?

asked by: Alex B

Expert Reply:

I would be happy to help you determine which MORryde Rubber Suspension Upgrade for Triple Axle Trailers you will need for your 2008 Keystone Raptor Toy Hauler with triple axles.

First you will need to verify that the hangers on your trailer are at least 3-1/4" long if the leaf springs are installed on top of your axle, or 4-1/4" tall if the leaf springs are underneath the axle.

Next you will need to verify the axle spacing on your trailer. You will measure this from the center of one axle to the center of the next axle.

If your trailer has 33" axle spacing you will want the MORryde Rubber Suspension Upgrade for Triple Axle Trailers - 33" Wheelbase - 5.2K to 7K # MR67ZR, and if you have 35" axle spacing you will need the # MR77ZR instead.

The equalizers included in both kits have a new bushing installed in the top mounting hole so you will not need to worry about replacing any bushings.

I included a link to the written instructions for both of the kits mentioned for you to take a look at.