Air Lift Air Bag Kit for 2007 Chevy Silverado 2500HD Classic with B and W Gooseneck

Question

Question:

I have a 2007 Chev. 2500 hd Classic. I have a BW Roll Over Ball Hitch already on it. Will Airlift Airbags work with the hitch?

asked by: Rick R

0

Expert Reply:

Yes we have the Air Lift LoadLifter 5000 kit part # AL88275 as a fit for your 2007 Chevy Silverado 2500HD Classic that is compatible with in-bed hitches like the B and W hitch # BWGNRK1067 that you have.

expert reply by: Jameson C

0

Answer 1

B and W has the part #BWGNRK1062 as a fit for the 3500 long bed models of the 2007 Chevy Silverado and the #BWGNRK1067 as a fit for the 2500HD models. The bracket designs are quite a bit different and it looks like the holes in the truck frames are…

view full answer...

Answer 2

You will need the B&W Turnoverball Underbed Gooseneck Trailer Hitch #BWGNRK1067 to fit your 2007 Chevrolet Silverado 2500HD Classic with a short bed. As you have a short bed you may opt for the 4" Offset Ball #BWGNXA4085. We also have the…

view full answer...

Answer 3

For your 2006 Chevrolet Silverado 2500 you will need the B&W Turnoverball Underbed Gooseneck Trailer Hitch #BWGNRK1067. This will give you a gooseneck hitch ball that can easily be stored in the hitch and still provides a clean bed for every day…

view full answer...

Answer 4

The B&W Turnoverball Underbed Gooseneck Trailer Hitch & Installation Kit #BWGNRK1067 is a confirmed fit for the 2008 GMC Sierra 3500 longbed dually. The linked video shows installation in a Silverado. Your truck must have only one crossmember…

view full answer...

Answer 5

It looks like you have an old Valley Stow-A-Ball Gooseneck but it also looks like it is incomplete. Valley is no longer in business so that ball is no longer available. I've attached a photo of that style ball to help. There is not a gooseneck…

view full answer...

Answer 6

Yes, B&W does make a taller hitch ball. It is the 1" High-Rise Ball for B&W Turnoverball Gooseneck Trailer Hitch item #BWGNXA2050 which is 5-1/16" tall. The ball included with the item #BWGNRK1314 is 4-1/6 tall. This is measured…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Air Lift Air Bag Kit for 2007 Chevy Silverado 2500HD Classic with B and W Gooseneck

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching