Installation of EchHitch 306-X7257 on 2016 Subaru WRX

Updated 01/20/2021 | Published 01/18/2021

Products Featured in This Question

EcoHitch Invisi Trailer Hitch Receiver - Custom Fit - Class III - 2"

(181)

$418.57

1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs

(2639)

$13.66

Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/4" Long - 7,500 lbs

(3985)

$31.05

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(52)

$68.95

Question:

Hi, I’m interested in purchasing an Invisi hitch for a 2016 Subaru WRX. While installation looks pretty straightforward, I think I’d rather have a professional handle that. Can you recommend an installer near Toluca Lake, CA 91602? Thank you for your help.

asked by: Rodolfo A

Expert Reply:

The EcoHitch # 306-X7257 will fit a 2016 Subaru WRX as long as it's equipped with the knock-out panel in the lower rear fascia.

I don't have a specific recommendation for an installer, any trusted mechanic should be able to handle the installation. In this case, the rear bumper cover/fascia needs to be temporarily removed and part of the fascia needs to be trimmed, as does some of the heat shielding. A body shop might be a better alternative, as they'd be more well versed in removal and reinstallation of these parts than an ordinary mechanic would be.

If you'll be doing some light duty towing with the hitch, you'll also need a trailer wiring harness like part # C56259, a ball mount like # C45010 and for a trailer ball, use # 19260 for a 1-7/8 or # 63845 for a 2 inch ball. You will also need a hitch pin like # PC3.

I've linked to install videos for the hitch and the wiring harness.