Distance Between Axle Center and Trailer Frame of Timbren Silent Ride TSR7000T05
Updated 12/16/2020 | Published 12/12/2020
Question:
On the 7000lbs3 inch silent axel diagram shows a 6 3/8 from center of axle to bottom of fram. Is that measurement with the spring compressed
asked by: Mike D
0
Expert Reply:
The distance from the center of the axle to the trailer frame of the Timbren part # TSR7000T05 of 6-3/8 inches is without a load on the suspension. This is also where the suspension would sit without an excessive load on the trailer as well.
expert reply by:
Jameson C
0
click to enlarge
Product Page this Question was Asked From
Timbren Silent Ride Suspension for Tandem Axle Trailers w/ 3" Round Axles - 7,000 lbs
- Trailer Suspension Parts
- Leaf Spring Replacement System
- Camper
- Car Hauler
- Utility Trailer
- 7000 lbs
- Round Axle - 3 Inch
- Tandem Axle
- Timbren
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Which is Better for 2026 Ram 3500 with OEM Rail B and W Companion or Curt A25
- Article: RV AC Not Cooling? What's Normal, What to Check, and When to Replace
- Q&A: Determining Correct Length Replacement Leaf Spring
- Q&A: Should Leaf of Trailer Leaf Spring be Removed to Lower Capacity
- Q&A: How to Find if Dexter Heavy-Duty Suspension Kit Will Fit on Trailer
- Q&A: Recommended 26 Inch Long Leaf Spring for a 4,400 lbs Axle
- Q&A: Tandem Axle Boat Trailer Tire Wear on Inside of Tire
- Q&A: Installing a Timbren Silent Ride System
- Article: Converting Your RV Water Heater to Tankless
- Article: Double-Eye Trailer Suspension System Review
- Article: Trailer Maintenance Schedule
- Article: Most Popular Wheel Bearings
- Article: How to Install E-Track in 3 Easy Steps
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)