Do You Have A 480-8 3.75 Wide 5 On 4.5 With A Center Hole Of 3 3/16 inches?
Updated 12/15/2020 | Published 12/12/2020
Question:
do you have a 480-8 3.75 wide 5 on 4.5 with a center hole of 3 3/16 inch
asked by: Mike G
0
Expert Reply:
The closest thing I have for you is going to be a rim from Kenda # AM30060. It is a 4.80/4.00-8 Bias Trailer Tire with a 8" Solid Center Wheel measuring 3.75 inches in width. It has a 5 on 4-1/2 bolt pattern and it is a Load Range C tire. The pilot diameter is 2.8". Be sure to triple check your measurement of the end of the hub cap to make sure before you purchase.
expert reply by:
Adam E
0
Product Page this Question was Asked From
Kenda 4.80/4.00-8 Bias Trailer Tire with 8" White Wheel - 5 on 4-1/2 - Load Range C
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range C
- 4.80/4.00-8
- 8 Inch
- K - 65 mph
- 5 on 4-1/2 Inch
- Steel Wheels - Powder Coat
- Kenda
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Steel Trailer Wheel - 8" x 3-3/4" Rim - 5 on 4-1/2 - White
- Article: Trailer Tire Sizing
- Article: Printable Trailer Bolt Hole Pattern Template
- Q&A: How to Correctly Position Ramp Door Spring for Installation
- Q&A: How to Identify Right Versus Left Trailer Ramp Springs
- Q&A: What is the Difference Between Load Range B and C Trailer Tires
- Q&A: What is Speed Rating of Trailer Tires in Size 4.80-8
- Q&A: Difference Between 30205 and L44643 Bearings
- Q&A: Recommened Trailer Tires/Wheels to Replace a 4.8-8 Tire W/ 5 Lugs
- Q&A: Can A Smaller Tire Be Put On My Trailer To Lower It
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Trailer Wiring Diagrams
- Article: Mastering Tire Maintenance: Does Tire Pressure REALLY Matter?