Bearing Kit for Dexter 7k Axle with 2.25 inch Diameter for Seal
Updated 12/08/2020 | Published 12/06/2020
Question:
I am looking to purchase some replacement bearings kits for my 2016 load trail gooseneck. It has 2 7k dexter axles with the ez lube Hub. The spindle seal is 2.25” and the kit I see for it part number bk3-220 does not have the locking tabs for the spindle nut. Is this the correct kit or do I need bk3-210?
asked by: Tyler P
0
Expert Reply:
Since your spindle seal dimension is 2.25 inch the correct Dexter 7k bearing kit is the part # BK3-200.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Replacement Trailer Wheel Bearing Kit, 14125A/25580 Bearings, 14276/25520 Races, Seal 10-36
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing 14125A and 25580
- Race 25520 and 14276
- 7000 lbs Axle
- etrailer
more information >
Continue Researching
- Q&A: Replacement Bearings for 2021 Grand Design Momentum 320G With 7k Dexter Axles
- Q&A: Bearings and Races for 7,000 Pound Trailer Axle
- Q&A: Replacement Bearing Kit for 7K Dexter Axles 651773
- Q&A: Replacement Bearing Kit for Brinkley Z3100
- Article: Most Popular Wheel Bearings
- Q&A: What Brand are the BK3-200 Bearing Kits
- Q&A: Replacement Brakes For A 7,000 Pound Lippert Axle
- Q&A: Bearing Kit For Curt/Lippert 7,000 lb Trailer Axle
- Article: Trailer Wiring Diagrams
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Maintenance Schedule
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs