Will the Curt Echo Trailer Brake Controller Work On a 40' RV

Question

Question:

I have an RV that is 40ft long. Will the distance between my phone and the Echo be a problem ?

asked by: Lisa

1

Helpful Expert Reply:

The Curt Echo Wireless Trailer Brake Controller part # C51180 has a maximum effective range of 50' so a 40' RV will not be a problem. This has been tested and confirmed with Curt.

expert reply by: Conner L

1

Answer 1

Hey Dave, in a situation like this your best option would be a brake controller that has multiple trailer presets so you can pick quickly switch between the two settings your two trailers require. For that you would want the Prodigy P3 part #90195…

view full answer...

Answer 2

We actually have a version of the #ETBC7 that we put together specifically with the Curt Echo Mobile brake controller part #C51180 in mind with the #ETBC7L which comes with just the components needed for the Echo. The ETBC7 comes with the same…

view full answer...

Answer 3

Great questions! The Curt Echo Wireless Trailer Brake Controller #C51180 will operate using the settings that you chose in the iPhone app regardless of whether you have the app pulled up or not so you can jump from one app to the next or even turn…

view full answer...

Answer 4

I think in an absolutely ideal world you'd have two brake controllers so that you could set the max braking pressure individually but in reality that would be really involved to pull off and you'd get solid results with just a single brake…

view full answer...

Answer 5

The range of the Curt Echo Mobile Trailer Brake Controller part #C51180 is listed to be right at 50 feet. We've found that to be a pretty conservative number and also that this controller has really great reception. It would work well on your…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 12

It is okay to mix and match the Lippert Road Armor #LC696740 with the MORryde 2-1/4" #MR46ZR or 3-1/8" #MR76ZR shackle straps. The MORryde shackles are superior in construction to the Lippert kits we currently carry. MORryde did just…

view full answer...

Will the Curt Echo Trailer Brake Controller Work On a 40' RV

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching