Recommended Trailer Vent and Fan for Outside Air in Parked Trailer
Updated 11/27/2020 | Published 11/25/2020
Products Featured in This Question
Question:
We want to use a couple of these in conjunction with a fan to keep outside air flowing through the trailer while it is sitting still. How many cfm will be able to flow through each one of these. Thanks
asked by: Jeff
Helpful Expert Reply:
The Vent for Enclosed Trailers - Aluminum - 12-1/4" Wide x 10-1/2" Tall # PLR20 will allow outside air to flow but there is no cubic foot per minute rating as that would require a fan or direct wind for a vehicle sitting still. The fan you use will dictate that and the air flow of that fan will be lower than the rating because only four 2 inch diameter holes will draw air.
I recommend the Flex-a-lite 12" Trimline Reversible Electric Radiator Fan - 12V - 1,105 CFM # FLX112 for your application.
Product Page this Question was Asked From
Exterior Wall Vent for Enclosed Trailers - Aluminum - 12-1/4" x 10-1/2"
- RV Vents and Fans
- Vent
- Wall Vent
- No Fan
- Metal
- Silver
- Polar Hardware
more information >
Continue Researching
- Q&A: Will the Draw-Tite Ball Mount # 2923 Work on a 2024 Tesla Model Y with the Tow Package?
- Q&A: Options to Vent a Storage Compartment on an RV
- Q&A: Replacement 3,500 lbs 26.5" Long Slipper Spring
- Q&A: Looking For Smart Thermostat To Use With Furrion Chill Cube AC unit
- Q&A: Can Coleman 13,500 Mach 3 AC Unit Be Replaced With Furrion Chill Cube?
- Q&A: How Does Ducted System Work With Furrion Chill Cube
- Q&A: Can Furrion Chill Cube AC Unit Be Used To Replace Coleman Mach AC?
- Article: RV Propane Troubleshooting | Common Propane Issues and How to Solve Them
- Article: How to Raise Your Travel Trailer Height
- Article: Trailer Lighting Requirements
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Right Trailer Hitch Class
- Article: Best RV Roof Vents
- Article: Diode Installation Instructions for a Dinghy with Separate Tail Light Wiring