2017 GMC Acadia Denali flat towing equipment

Question

Question:

Hello there! I’m about to purchase a 2017 GMC Arcadia Denali and wanted some more information on flat towing this vehicle Behind my 2014 Thor access 24.1 class A motorhome. I just want to confirm that everything is good to go and have an idea of what price for all of the equipment needs to set this up will be. Thanks in advance!

asked by: Theo

0

Expert Reply:

Yes the 2017 GMC Acadia Denali is flat towable as-is. I checked the owners manual of your vehicle online to confirm this.

The first thing you'll need is a base plate kit like the part # RM-523189-5 which is a confirmed fit for your vehicle and is among the easiest to use.

In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon All Terain, # RM-522. This has non-binding arms which makes the setup very easy to connect/disconnect.

For lighting/safety cables, locks, and covers for the tow bar we have the Roadmaster Falcon All Terrain kit part # RM-9243-1 which comes with all of that as one part number. The diode kit that comes with this allows you to splice into the taillight wiring so that your RV controls the vehicle taillights and does not require drilling into the taillight housings. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.

And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.

Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.

I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.

expert reply by: Jameson C

0

Answer 1

Yes, for your 2014 Buick Enclave and your Falcon 2 tow bar you will need base plates #523149-1. I have linked the instructions and a video showing a typical installation for you. There are a few other things needed to flat tow a vehicle if you do not…

view full answer...

Answer 2

Any GMC Acadia 2020 or newer would need to be towed on a dolly like the Roadmaster Tow Dolly #RM-2050-1. The 2019 and earlier models are able to be flat towed. If you have a 2019 model (or earlier) that you need to set up to flat tow, I can…

view full answer...

Answer 3

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 4

Hey Steve, thanks for reaching out! The Roadmaster Direct-Connect Base Plate Kit #RM87NQ fits your 2025 Ford Maverick as long as it's the Hybrid model that doesn't have the engine block heater. It doesn't come with the 6-Pin connector,…

view full answer...

Answer 5

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 6

Gladly! The difference between the Blue Ox Patriot 3 Radio Frequency, Portable Braking System BRK2019 and the Blue Ox Patriot Radio Frequency, Portable Braking System #BLU37TR is that the Blue Ox Patriot 3 RBRK2019 is older, no longer available, and…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Yes, it does John. So long as you have the Ford Performance Heavy Duty Modular Front Bumper with the tow hooks, the easiest way to flat tow it is to use the Curt Custom Base Plate Kit item #C59JR. This adapter connects right to the tow hooks without…

view full answer...

Answer 9

Hello Andy! Yes, I would be happy to put together a flat tow package for your 2019 GMC Canyon. Here is what I recommend: - Roadmaster Direct-Connect Base Plate Kit - Removable Arms #RM-523182-5 - Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights…

view full answer...

Answer 10

Hello Dennis, thanks for reaching out. We absolutely can provide all the parts needed to flat tow your 2024 Chevy Equinox RS. Here is what I recommend: - etrailer Invisible Base Plate Kit - Removable Arms #e98965 - etrailer SD Non-Binding Tow Bar -…

view full answer...

Answer 11

Hey Kathryn, what specifically on the Blue Ox Alpha are you needing to replace? Unlike Roadmaster they don't have as many replacement parts but you can contact them about getting yours rebuilt but that's just not something we can help with.…

view full answer...

Answer 12

Hi Michael! I did a bunch of research and found some stuff. You can only tow a 2026 Chevy Equinox front wheel drive with a gasoline engine behind a motorhome, but NOT with all 4 wheels on the ground. You would have to use a dolly, like the Roadmaster…

view full answer...

2017 GMC Acadia Denali flat towing equipment

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching