Slant Back Trailer Fender for 14 Inch Wheels With Corrosion Resistance  

While I don't know the exact design of the fenders on an EZ Loader trailer I do have quite a few options to choose from that will fit your wheels like the Single Axle Trailer Fender for Boat Trailers #HP38VR. I've attached our page of options…

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

For a ST225/75R15 tire such as the Karrier #AM10303, the diameter is 28.3 inches, or 71.88 centimeters. I have added a link to a help article on measuring trailer tires, as well as a link to each of our 225/75-15 tires.

We do offer many styles of replacement trailer fenders in plastic, steel and aluminum that you can check out on the page I linked for you. To start, click on your wheel diameter. I reviewed many photos of the 2011 RP-177 and it appears that the steel…

Most manufacturers are in the process of discontinuing their fifth wheel tailgates with the camera relocation kits due to mechanical issues. Therefore I could not find one that fits your 2017 Ford F-350 Super Duty. The Stromberg Carlson 4000 Series…

We recommend that all trailer tires be inflated to the max psi stated on the sidewall of the tire. If the tire is under inflated, the weight capacity is lowered to an unknown amount for that tire. Although running lower air pressures can improve the…

It looks like the Harbor Freight Folding Trailers use a Jeep style fender so if that's the case then the best option we have for replacement is the Single Axle Trailer Fender part #HP99VR which will work just fine with 4.80x12 tires. That said,…

The closest option we have is the steel part #HP38VR which is 30 inches long, 9 inches wide, and 13-1/4 inches tall.