Will a 175/80R13 Tire Fit a 12 Inch Wheel

Question

Question:

Will a st 175/80R13 tire fix the rim That a 4.8-12 tire rim trying to keep my 5 spike white wheel Just need to change tires. Will this work

asked by: Courtney I

0

Expert Reply:

A 175/80R13 tire will not fit a 12 inch wheel like you have, so if you want to keep the wheel, you will need a tire that fits a 12 inch wheel. Otherwise, if you are looking to upgrade the tire size, you will also need to replace the wheel.

So for a 12 inch wheel, the tire you can use is the Taskmaster 4.80R12 Radial Trailer Tire # TT48012C, so long as its 990 lb capacity per tire is appropriate for your trailer.

Otherwise, since it looks like you have a 5-bolt pattern, you can upgrade your wheel and tire to one that has a similar pattern as yours, the Karrier ST175/80R13 Radial Trailer Tire w/ 13" White Modular Wheel # AM31957

This tire has a 1,360 lb capacity; also keep in mind that the 175/80R13 tire will be an extra inch in diameter and 1/2 inch wide.

expert reply by: Kyle S

0

click to enlarge

Answer 1

The 12 inch tires that we carry are rated for 65 miles per hour. Any faster than that for extended periods and the excessive heat build up will cause tire failure. To get a tire with a higher speed rating you would have to go up in size. That also…

view full answer...

Answer 2

Since both a ST145/R12 size tire, like the Kenda Karrier S-Trail #AM10130, and a 5.30-12 size tire, like the Kenda K353 #AM10068, fit a 12 inch wheel, a ST145/R12 size tire can replace a 5.30-12 size tire. Keep in mind that these tires do have…

view full answer...

Answer 3

As long as you have the needed wheel well and trailer frame clearance, there is no reason that you couldn't go to a larger tire size from your existing 5.30-12 tires. The next size up from what you have is going to be with an ST175/80-13 size…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 6

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 7

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 8

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 9

Great question, William! The Karrier ST225/75R15 #KE63KV is a KR35 while the Karrier ST225/75R15 #AM10303 is a KR03 according to Kenda. There is a slight variation in the tread pattern and from what Kenda says about them it looks like the KR03 is…

view full answer...

Answer 10

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 11

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 12

The 5 means that the wheel is 5 inches wide from bead to bead (not overall width). The J indicates the design of the wheel bead seat but it is nothing you need to be concerned with as this is the most common shape for all trailer tires. To measure…

view full answer...

Will a 175/80R13 Tire Fit a 12 Inch Wheel

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching