Parts Needed to Flat Tow 2020 Jeep Cherokee with Roadmaster Stowmaster
Updated 10/12/2020 | Published 10/09/2020 >
Products Featured in This Question
Question:
I had a friend give me his old road master stowmaster 5000 as he saw we bought a 2020 Jeep Cherokee and have an Rv. He sold his a while back and it was just sitting in his garage. Serial number is 105907. He also has the rock guard to go with it. I was planning on eventually going with a flat tow on it but this advanced that project. What else do I need to finish this? Bas plates for jeep A braking system. Thinking removable Charging line Signal line. Anything else?
asked by: Scott R
Expert Reply:
For your 2020 Jeep Cherokee the Roadmaster Base Plate Kit part # RM-521452-4 would be an excellent option for connecting to the Stowmaster part # RM-501.
For lighting/safety cables, locks, and covers for the tow bar we have the Roadmaster Falcon All Terrain kit part # RM-9252 which comes with all of that as one part number. The diode kit that comes with this allows you to splice into the taillight wiring so that your RV controls the vehicle taillights and does not require drilling into the taillight housings. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.
And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.
Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.
I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.
Product Page this Question was Asked From
Roadmaster StowMaster Tow Bar - Coupler Style for 2" Ball - Car Mount - 6,000 lbs
- Tow Bar
- Coupler Mount
- Telescoping - Binding
- Steel
- 6000 lbs
- Fits Roadmaster Base Plates
- Stores on Car
- Cables Not Included
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Base Plate Kit to Flat Tow 1997 Suzuki Sidekick 4WD 2 Door
- Q&A: What Baseplate Do I Need To Go With My Roadmaster StowMaster Tow Bar
- Article: Must-Have Flat Towing Components
- Q&A: Will Air Lift Air Bags w/ Air Spring Cradles Require Spacer On 2021 Jeep Gladiator With 2-1/2" Lift
- Article: Roadmaster Vehicle Specific Base Plates
- Q&A: Roadmaster Stowmaster 5000 Tow Bar Compatibility with Roadmaster Base Plates
- Q&A: Base Plates For 2-Door Geo Tracker For StowMaster Tow Bar
- Q&A: Adapters Needed To Connect A Roadmaster StowMaster 5000 And Falcon 5250 To A Demco Classic Baseplate
- Q&A: Parts Needed to Flat Tow 2024 GMC Sierra 2500HD AT4X
- Article: What Is a Supplemental Braking System?
- Article: Flat Towing Package for 2016-2017 Chevrolet Equinox and GMC Terrain
- Article: Flat Towing Package for 2025 Ford Maverick
- Article: Flat Towing Package for 2002-2004 Jeep Liberty
- Article: Base Plate Adapter Table


