Wheels, Spindle, and Hubs for Making Hay Unroller for Round Bales
Updated 09/30/2020 | Published 09/29/2020
Products Featured in This Question
Question:
Looking to build a hay unroller to feed large round bales that will not weigh over 1300 lbs mostly closer to 1000. It will not have an axle. What spindle wheels etc do you recommend?
asked by: BRIAN A
Expert Reply:
You'll want a wheel and tire setup like the part # Taskmaster ST235/75R15 Radial Off-Road Tire w/ 15" Vesper White Spoke Wheel # TA52RR which has off-road tires for your application so to build the setup around that you'd want hub # 8-213-5UC1-EZ and then a spindle like the # TRU37FR that you referenced.
This setup has about 4 times the weight capacity you'd need in terms of on-road weight capacity which should be fine for what you are doing.
Product Page this Question was Asked From
#42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles - 2-1/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- With Flange
- 25580
- 2-1/4 Inch Diameter
- Round
- For 5000 lb Axle
- For 6000 lb Axle
- For 7000 lb Axle
- TruRyde
more information >
Continue Researching
- Q&A: What is the Four Bolt Brake Mounting Flange for 8,000 Lb Axles
- Q&A: Length Measurements for EZ Lube Spindle 2.25
- Q&A: Can Grease be Used in Oil Bath Hub
- Q&A: Dimensions of Trailer Spindle TRU37FR
- Q&A: Replacement Spindle Recommendation for Dexter # 42
- Article: Trailer Wiring Diagrams
- Q&A: What Are The Dimensions Of The # 42 E-Z Lube Spindle TRU37FR?
- Q&A: Replacement Trailer Rim With A 4,000 Plus Capacity
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Most Popular Wheel Bearings
- Article: Brake Controller Installation: Starting from Scratch
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)