Can Redarc Tow Pro Elite Brake Controller Install in 2015 Ram 3500 with Integrated Brake Controller

Updated 09/23/2020 | Published 09/22/2020

Products Featured in This Question

Redarc Tow-Pro Elite Brake Controller - Dash Knob - Off-Road Mode - Up to 3 Axles - Proportional

(1676)

$290.00

Redarc Plug-and-Play Wiring Harness for Tow-Pro Trailer Brake Controllers

(138)

$27.00

Question:

Will this work in 2015 RAM 3500 with factory brake controller?

asked by: Robert M

Helpful Expert Reply:

To install an aftermarket brake controller Like the Redarc Tow Pro part # RED44FR on a 2015 Dodge Ram that has the factory integrated controller you will have to disconnect the ITBM (Integrated Trailer Brake Module). Doing so will turn on a warning lamp on the instrument cluster. In order to disconnect the ITBM and not get the warning lamp, your local Dodge dealer will have to reconfigure the TIPM (Totally Integrated Power Module), of the truck. Once the TIPM has been reconfigured, and the ITBM has been unplugged, you can use a vehicle specific brake control harness such as the # 331-TPH-020, to install the aftermarket brake control.

To disconnect the ITBM, you or the dealer will need to contact the Business Center to remove the sales code (XHC). The TIPM will need to be reconfigured. Once the sales code has been disabled you can disconnect the ITBM electrical connector, under the dash, without getting the warning lamp. Basically the computer needs to be told that the truck does not have a brake controller so you can unplug it without getting that warning light.

expert reply by: Jameson C