What is the Length of the Baggage Door Catches and Distance Between Mounting Holes

Question

Question:

Need to know total length of the latch and distance between the two mounting holes?

asked by: Michael S

0

Expert Reply:

The Baggage Door Catches - Bullet Style - White - Qty 2 # 37210234 are 2-5/8" long and the screw holes are 3/4" apart.

expert reply by: Erik B

0

click to enlarge

Answer 1

The Camco RV baggage door catches measure about 2-1/2 inches long, 1 inch wide, and 3/4 of an inch deep. The mounting holes are roughly an inch center on center. They come in Polar White, part #CAM44173, and Colonial White, part #CAM44163.

view full answer...

Answer 2

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 3

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 4

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 5

The first thing that we will want to look at for your 2013 Lincoln MKX is a base plate kit so that we can attach the tow bar to your Lincoln. I recommend using the Blue Ox Base Plate Kit #BX2625 because it is very easy to use, and when you are not…

view full answer...

Answer 6

Hey Randy! I checked online and your 2014 Lincoln MKX weighs anywhere from 4,251 to 4,429 lbs depending on options. So unless you're hauling a set of weights in your SUV, you'll be well under that 5,000 lbs capacity your RV has. As long as…

view full answer...

Answer 7

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Answer 8

Hello Chris, sorry to hear about what happened to your awning. We carry the Lippert/Solera awnings here, so we certainly may have replacement parts for you, but it depends on what kind of awning you have currently. There is no way to look this up…

view full answer...

Answer 9

There is a retainer bolt in the wheel carrier that holds the bushing and king pin in place in the Demco Kar Kaddy SS #DM9713045. You would need to remove the retainer bolt to release the king pin and replace it. This is a part that we do not…

view full answer...

Answer 10

Hey Debbie. The RV Designer Screen Door Latch for Phillips Doors item #RD68ZR measures 2-7/8" long x 1" wide x 7/16" tall. The hand extends 2-13/16" from the body of the latch with the mounting holes spaced 2-3/8" apart. The…

view full answer...

Answer 11

Hey Steve, thank for the information on your Dometic AC unit. Based on that the correct replacement shroud would be the part #DMC98FR. How old is your unit?

view full answer...

What is the Length of the Baggage Door Catches and Distance Between Mounting Holes

Product Page this Question was Asked From

Continue Researching