Could Buyers Products Door Check and Hold Back Item # 337BM2395AA11 Fit Tractor Cab

Question

Question:

Would this product be able to adapt to a tractor cab door. The door on our tractor cab wont stay open and makes it difficult to either enter or exit the cab without being attacked by the door. Ive contacted the cab manufacturer about this issue with no luck. Thanks

asked by: Tom G

0

Expert Reply:

Yes the Buyers Products Door Check and Hold Back Item # 337BM2395AA11 that you referenced will work great on your tractor cab to keep the door from attacking you.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The part of the Buyers Products Door Check and Hold Back #337BM2395AA11 with the spring needs to be mounted to your door frame (at the top) while the arm without the spring needs to be mounted to your door. I have attached a photo showing the…

view full answer...

Answer 2

The Buyers Products Door Check and Hold Back part #337BM2395AA11 can be installed with many types of hardware depending on the surface you're mounting it to. When mounting to a very heavy material like very thick ply wood or a thicker steel using…

view full answer...

Answer 3

We have not had a chance to install the Buyers Products Door Check and Hold #337BM2395AA11 you were looking at, but I would be happy to go over the installation process. The section of the unit that has the spring will need to get mounted to the…

view full answer...

Answer 4

I'll try to answer these in order for you. First, the Buyers Products Door Check and Hold Back #337BM2395AA11 does hold the door open at a 90 degree angle with 30-lbs of pressure, so as long as it's not a heavy wind it should hold everything…

view full answer...

Answer 5

Yes, the Buyers Products door check and hold back #337BM2395AA11 you referenced will keep the wind from catching the door and causing the issues you described. The spring-assisted slide passes over the center of the check to hold the door open at 90…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Could Buyers Products Door Check and Hold Back Item # 337BM2395AA11 Fit Tractor Cab

Product Page this Question was Asked From

Continue Researching