bing tracking image
  1. Accessories and Parts
  2. Buyers Products
  3. RV Door Parts
  4. Door Holder
Buyers Products 90-Degree Door Check and Hold Back - Spring Loaded
Buyers Products

Buyers Products 90-Degree Door Check and Hold Back - Spring Loaded

Part Number: 337BM2395AA11
In Stock
$25.27
Retail:$41.85
You Save: 40%
Accessories and Parts
Add to cart
Buyers Products 90-Degree Door Check and Hold Back - Spring Loaded Door Holder 337BM2395AA11
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Prevent your door from slamming shut or flying open in the wind with this spring-loaded door check and hold back. It keeps your RV, trailer, toolbox, or compartment door open at a 90-degree angle. To close your door, just give it a slight push. 1-800-940-8924 to order Buyers Products accessories and parts part number 337BM2395AA11 or order online at etrailer.com. Free expert support on all Buyers Products products. Great prices and Fastest Shipping for Buyers Products 90-Degree Door Check and Hold Back - Spring Loaded. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (9)
  • Q & A (0)
  • Photos

Buyers Products Accessories and Parts - 337BM2395AA11

  • RV Door Parts
  • Door Holder
  • Buyers Products

Prevent your door from slamming shut or flying open in the wind with this spring-loaded door check and hold back. It keeps your RV, trailer, toolbox, or compartment door open at a 90-degree angle. To close your door, just give it a slight push.


Features:

  • Door check and hold back keeps your door open at a 90-degree angle so it won't slam shut or fly open
    • Can be used for doors that swing open either vertically or horizontally
  • Heavy-duty spring with check can withstand up to 30 lbs of pressure and most gusts of wind
    • Releases automatically and closes your door softly when you give it a slight push
  • Carbon steel construction is strong and durable
  • Zinc plated for corrosion resistance
  • Easy installation with pre-drilled mounting holes


Specs:

  • Slide rod bracket length: 13"
    • Distance between mounting holes: 12-3/4"
  • Arm bracket length: 2-1/4"
    • Distance between mounting holes: 1-1/2"
  • Arm length: 11"
  • Spring dimensions:
    • Retracted length: 3-9/16"
    • Extended length: 6-7/8"


The slide rod on this door check, which includes the spring, mounts to the top of your door frame while the arm attaches to your door. Because the unit installs inside the doorjamb, your door will still be able to be latched shut.



BM2395AA11 Buyers Products Door Check and Hold Back with 11 Inch Arm/13 Inch Slide Rod/30 Pound Spring




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Buyers Products 90-Degree Door Check and Hold Back - Spring Loaded - 337BM2395AA11

Average Customer Rating:  4.8 out of 5 stars   (9 Customer Reviews)

Prevent your door from slamming shut or flying open in the wind with this spring-loaded door check and hold back. It keeps your RV, trailer, toolbox, or compartment door open at a 90-degree angle. To close your door, just give it a slight push.

by:

Product is GREAT...
SHIPPING TIME needs
improvements



by:

Brooke M. profile picture
Etrailer Expert

Brooke M.

2/3/2023

It looks like your experience with the product or with shopping at etrailer could have gone better. If you would like to add any comments to your review, I would be happy to assist you.



by:

fast shipping friendly people



by:

Worked well and holds up



by:

Exactly what I needed!



by:



by:



by:



by:


9
9

See what our Experts say about this Buyers Products Accessories and Parts

  • Which Side of the Buyers Products Door Check and Hold Back # 337BM2395AA11 Mounts Close to Hinge
    The short spring side of the Buyers Products Door Check and Hold Back # 337BM2395AA11 mounts close to the door hinge.
    view full answer...
    Image 1 for
  • How Does Buyers Products Door Check and Hold 337BM2395AA11 Get Installed?
    We have not had a chance to install the Buyers Products Door Check and Hold # 337BM2395AA11 you were looking at, but I would be happy to go over the installation process. The section of the unit that has the spring will need to get mounted to the frame of the door, and the arm without the spring gets mounted to the door itself. The correct mounting hardware will really come down to the material of your door so there is no specific recommendation other than using washers to best distribute...
    view full answer...
    Image 1 for
  • Where to Install Buyers Products Door Check and Hold Back
    The part of the Buyers Products Door Check and Hold Back # 337BM2395AA11 with the spring needs to be mounted to your door frame (at the top) while the arm without the spring needs to be mounted to your door. I have attached a photo showing the dimensions and a review video that goes over some of the basic features for you to check out.
    view full answer...
    Image 1 for
  • Best Options for Holding Open a Motorhome Door
    You will need a couple of inches of door frame to attach the Buyers Products 90-Degree Door Check and Hold Back item # 337BM2395AA11. If your screen door and exterior door butt up against each other and you want to mount it in-between then this will not work for you. If you are wanting to prop them both open at the same time then this will work great. You will just attach it to the top of your door frame. If you are unable to use the Door Check and Hold Back then I recommend using the...
    view full answer...
  • Could Buyers Products Door Check and Hold Back Item # 337BM2395AA11 Fit Tractor Cab
    Yes the Buyers Products Door Check and Hold Back Item # 337BM2395AA11 that you referenced will work great on your tractor cab to keep the door from attacking you.
    view full answer...
    Image 1 for
  • How To Install the Buyers Products 90-Degree Door Check and Hold Back
    To install the Buyers Products 90-Degree Door Check and Hold Back # 337BM2395AA11, the side with the spring needs to be mounted to your door frame (at the top) while the arm without the spring needs to be mounted to your door itself. The correct hardware will depend on the material being mounted to. When mounting to a very heavy material like a thick ply wood or a thicker steel using some #12 or #14 self tapping screws would be an great choice. If you're going into thinner material you...
    view full answer...
    Image 1 for
  • Installation of the Door Check and Hold Back part # 337BM2395AA11
    The Buyers Products Door Check and Hold Back part # 337BM2395AA11 can be installed with many types of hardware depending on the surface you're mounting it to. When mounting to a very heavy material like very thick ply wood or a thicker steel using some #12 or #14 self tappers would be a fine solution. If you're going into thinner material You will need to use bolts with large washer to spread out the energy over a greater area. There are no written instructions for this because there are...
    view full answer...
  • Can the Buyers Products Door Check Be Used with a Lower Door Closer
    I'll try to answer these in order for you. First, the Buyers Products Door Check and Hold Back # 337BM2395AA11 does hold the door open at a 90 degree angle with 30-lbs of pressure, so as long as it's not a heavy wind it should hold everything just fine; your lower closer should help give this some added strength and resistance against the wind as well in this case. There is not a way to lock this in place though, so it's not going give you complete resistance to wind. Second, I don't see...
    view full answer...
  • Will Buyers Products Door Check and Hold Back # 337BM2395AA11 Help with Wind Grabbing Door
    Yes, the Buyers Products door check and hold back # 337BM2395AA11 you referenced will keep the wind from catching the door and causing the issues you described. The spring-assisted slide passes over the center of the check to hold the door open at 90 degrees. It releases automatically and closes door with a slight push.
    view full answer...
  • Install Hardware Ideas for Buyers Products Door Check and Hold Back part # 337BM2395AA11
    The Buyers Products Door Check and Hold Back part # 337BM2395AA11 can be installed with many types of hardware depending on the surface you're mounting it to. When mounting to a very heavy material like very thick ply wood or a thicker steel using some #12 or #14 self tapping screws would be an excellent choice. If you're going into thinner material you will need to use bolts with large washer.
    view full answer...

Do you have a question about this Accessories and Part?


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jameson C
Expert Research:
Jameson C
Employee Kathleen M
Installed by:
Kathleen M
Employee Mark S
Written by:
Mark S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924