Double Lip Grease Seals With 1.68 Inch Inner Diameter and 2.33 Inch Outer Diameter

Updated 08/20/2020 | Published 08/19/2020

Question:

Marine master trailer 2004 vin xxxxxxxxxxxx. I was was looking for all new internals for my hubs on my boat trailer for what ever reason on the the MM website the 04 and older trailers it states the rear seal diameter is different from anything that I can find 1.68ID 2.33OD I was wanting a double lipped or better spring loaded seal if possible along with new bearings and bearing buddy caps. Thanks for any help!

asked by: Mike

Helpful Expert Reply:

We do have a double lip grease seal that has a 1.68 inch inner diameter and 2.33 inch outer diameter. What you need is the following:

- Grease Seal - Double Lip # 010-180-00

You mentioned bearings as well, but I am not sure which ones you need so I have added a link to our selection of bearings for you to check out. You can find these by either the bearing number or by the inner diameter as well. I have also added a link to our selection of Bearing Buddies, which you can find by measuring the diameter of your hub bore.

expert reply by: Kyle S