Option to Lower Nose of Trailer Using Curt A20 Hitch for Ram Rail Kits
Published 08/19/2020
Products Featured in This Question
Question:
No, I don’t. I have not used it in the year I have owned it. What is the difference between the Curt E series and the A series?
asked by: Deven M
Expert Reply:
Typically you can raise the pin box in the frame brackets of the trailer to allow the nose of the trailer to sit lower. I would see if you can do that as that might be an easy fix. The Curt A16 hitch for Ram rail kits part # C16520-16021 has a height adjustment range of 14 to 18 inches so if your is measuring 20 inches that to me seems like yours isn't in the lowest position or you are using the hitch designed for industry standard rails and a rail kit adapter part # RP30154 which would add height.
We also have lift kits for tandem axle trailers that could help like the part # RR23QX.
Product Page this Question was Asked From
Curt A16 5th Wheel Trailer Hitch for Ram Towing Prep Package - Dual Jaw - 16,000 lbs
- 5th Wheel Hitch
- Fixed Fifth Wheel
- Aftermarket Below Bed Rails
- 4000 lbs Vertical Load
- 16000 lbs GTW
- Cushioned Double Pivot
- Standard - Double Jaw
- 14 - 18 Inch Tall
- CURT
more information >
Continue Researching
- Q&A: What Replacement Converter Do I Need for a Series 7300 Model 7345 Converter?
- Article: Ram Trailer Tow Prep Package
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Q&A: Will The Q Hitch Base Work With A Curt A20 Replacement Head?
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Q&A: Differences Between Curt Fifth Wheel Hitches for 2018 Ram 2500
- Q&A: 5th Wheel Hitch With Maximum Height for Most Trailer-to-Truck Bed Rail Clearance
- Q&A: Comparing the Curt Q20 and the Curt A20 5th Wheel Hitches.
- Q&A: What Nerf Bars do You Recommend for My 2022 Ram 2500 Crew Cab?
- Article: Converting Your RV Water Heater to Tankless
- Article: The Best 5th Wheel Hitches
- Article: How to Raise Your Travel Trailer Height
- Article: Fifth Wheel Trailer Hitch Information and Installation Tips
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
Deven M.
8/19/2020
I have a Curt A16 fifth wheel slide hitch installed in my Ram 2500 crew cab/short bed with the factory puck system. The issue I have is that the hitch head sits level with my bed sides, thereby making my camper ride high when hauling. I have the head lowered as far as it can go so that is not an option. I am looking for an option for my existing hitch or looking at a different hitch with a lower profile. The current hitch is 20inch tall from the bed to the top of the hitch head.