Best Way to Secure ATV to Trailer Using E-Track
Updated 08/17/2020 | Published 08/12/2020 >
Products Featured in This Question
Question:
Hi I am looking to outfit my flat bed surtrack trailer with some type of e track to hold down my Yamaha Kodiak 700 atv and another identical model. is your Brophy 2-Slot Horizontal E-Track - Zinc Plated Steel able to work as tire lash downs for these ? They weigh 680 lbs each.
asked by: Hunter P
Expert Reply:
Absolutely, the Brophy 2-Slot Horizontal E-Track can be used as an anchor point to hold down the tires on your ATVs. They have a safe working load limit of 1,000lbs, so that would be more than enough for your ATVs. You'll need straps to secure everything down, I linked our selection of E-track straps for you to check out.
A more complete option is the Erickson ATV E-Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks # EM09160. This comes with 4 Wheel chocks and 2 ratchet tie-down straps and is perfect for ATVs, lawnmowers and other wheeled equipment. The wheel chocks get bolted down to your trailer, and then your simply drive your ATV over them so that the rear tires are wedged between them, then run the straps over and clip the ends into the slot on the chock. It's designed to hold 2 tires at the back, so for both of your Kodiaks you'll need 2 kits.
I attached a short review video for you to check out, as well a picture a customer sent in with his trailer and ATVs loaded up.
Product Page this Question was Asked From
Brophy 2-Slot Horizontal E Track - Zinc Plated Steel - Qty 1
- E Track
- E Track Rails
- Horizontal
- 3-3/4 Inch Wide
- 1000 lbs
- Brophy
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: How Does The Brophy Angled Motorcycle Wheel Chock BR26MJ Mount?
- Q&A: What is the Difference Between the ST205/75R14 Kenda Karrier KR53 and the Kenda Karrier Tires?
- Q&A: Draw-Tite 06623-099 Wt. Dist Hitch w/ Sway Control Chain Hangers
- Q&A: Empty Ride Quality with Firestone Ride-Rite Air Helper Springs Installed
- Q&A: Comparing Pacbrake Air Bags To Air Lift And Firestone
- Q&A: Can E-Track be Flush or Recess Mounted Instead of Surface Mounted
- Q&A: Jack Cap Recommendation that Fits 2 inch Jack Top Tube
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Article: How to Install E-Track in 3 Easy Steps
- Article: Aftermarket Brake Control Wiring for 07-13 GM Full-Size Truck with Factory-Integrated Brake Control
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Article: Cargo Tie-Down Methods



