Is The Replacement Furrion Antenna For Cameras Also Compatible With The Monitor?

Question

Question:

Will this antenna work on the monitor?? I need one for the monitor.

asked by: Edward J

0

Expert Reply:

The Replacement Antenna for Furrion Vision 1, 2, and S Wireless RV Camera Systems # 772577 is only a replacement for the camera. I reached out to my contact at Furrion and there is not a replacement antenna option for the monitor. It is integrated and will require replacing the monitor.

You can replace the monitor without replacing the entire system:

-Replacement 4.3" Monitor for Furrion Vision S Wireless RV Camera System # FR77FR
-Replacement 5" Monitor for Furrion Vision S Wireless RV Camera System # FR97FR
-Replacement 7" Monitor for Furrion Vision S Wireless RV Camera System # FR47FR

expert reply by: Jason S

0

Answer 1

Yes. The Replacement Antenna for Furrion Vision 1, 2, and S Wireless RV Camera Systems #772577 will fit on your Furrion FOS48TA-BL.

view full answer...

Answer 2

Yes, the Replacement Antenna for Furrion Vision S Wireless RV Camera System part #772577 will work with the Furrion Vision Wireless RV Backup Camera System part FOS48TA-BL.

view full answer...

Answer 3

The extra pigtail of the Replacement Furrion Monitor Power Cable part #C-FOS07TAPK-006 that you referenced is considered to be an auxiliary port. You could plug an additional accessory into it it as long as you have a matching connector.

view full answer...

Answer 4

The Replacement Antenna for Furrion Vision 1, 2, and S Wireless RV Camera Systems #772577 is only a replacement for the camera. I reached out to my contact at Furrion and there is not a replacement antenna option for the monitor. It is integrated and…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Since your 2022 Ford Explorer has the factory tow package you can use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers item #3035-P to install the Redarc Tow-Pro Elite item #RED63RR. This adapter will connect to the one that comes…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Since your trailer has the bracket #FRCBRKT-BL that would mean your trailer has the Furrion pre-wiring which is very common for newer RVs. The part #FOS43TASF is a fit for this and would be a really easy install. This gives you a monitor with a 4.3…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The Furrion camera system we have is a closed system and would not be compatible with the in-dash display so you would need to purchase GM's camera system to be able to connect to your display instead of having another monitor. If you do end up…

view full answer...

Is The Replacement Furrion Antenna For Cameras Also Compatible With The Monitor?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching