How to Install the Tuson Direclink 100 on a 2011 Freightliner M2 102 DayCab

Updated 08/06/2020 | Published 08/05/2020

Products Featured in This Question

Tuson DirecLink Base Model Trailer Brake Controller - 1 to 4 Axles - Proportional

(36)

$510.44

Hook Probe Circuit Tester

(70)

$12.41

Question:

on a 2011 freightliner m2 102 day cab Were is the brake connector located at.

asked by: Miguel

Expert Reply:

I may have a solution for you, but I checked our resources and we're not showing any brake controller adapters available to install a brake controller on the 2011 Freightliner M2 chassis. In all likelihood if there is a plug in for a brake controller it's somewhere under the dash, but I really can't tell you where in this case or confirm that there is one on this chassis.

With that said, since there is no adapter available, if you were looking to use the Tuson Direct # 335DL-100 you would most likely need to hard wire the controller into the vehicle. You will want to use a circuit tester like the # PTW2993 to find the brake control wire from your 7 way connector, the 12v power wire and stop light switch under the dash and then connect those using the included adapter. This would be the only way we have available to install a brake controller on the 2011 Freightliner M2 chassis.

expert reply by: Erik B