Compatibility of King Pin Tripod Stabilizer for 5th Wheel Trailer

Question

Question:

i have a kingpin set up ,, will that tripod work..

asked by: Walter S

0

Expert Reply:

The Ultra-Fab 5th Wheel King Pin Tripod Stabilizer - Steel - 33" to 62" - 1,200 lbs # UF19-950600 will work for you. The Ultra-Fab 5th Wheel King Pin Tripod Stabilizer - Aluminum - 34" to 52" - 1,200 lbs # UF19-950200 is a light weight option that also is a good fit.

You can use extension legs # UF19-950202 for the aluminum option.

The tripod will work in conjunction with your landing gear to stabilize your 5th wheel trailer. The tripod specifically helps to stabilize the area that is over the pin box.

expert reply by: Jason S

0

Answer 1

Hey Gil, I looked up the pin weight of your 2025 forest river Sabre 36FLX and it's 2,155 lb which is more than what the part #UF19-950600 that you referenced is rated to support which means you'd need the higher rated part #UF19-950500 which…

view full answer...

Answer 2

Hi George, That’s a great question. The SmartPlug RV power inlet kits only come with straight connectors there isn’t a 90 degree connector sold separately by itself. The only 50 amp 90 degree angled cord SmartPlug currently offers is part #SM54SB. If…

view full answer...

Answer 3

The Ultra-Fab 5th Wheel King Pin Tripod Stabilizer #UF19-950600 heights are measuring to the bottom of the cup where the bottom of your king pin is going to sit. So you will have about 1-1/2" of rise left on the stabilizer.

view full answer...

Answer 4

Hey Michael, while we don't have a replacement plug that is 90 degree we have a 30 foot long 50 amp power cord that has a 90 degree connector on both sides with the part #SM54SB if that's something you'd be interested in.

view full answer...

Answer 5

The Ultra-Fab 5th Wheel King Pin Tripod Stabilizer part #UF19-950200 would be best for harsher environments. The Ultra-Fab 5th Wheel King Pin Tripod Stabilizer part #UF19-950600 has a black coating which will also resists rust but if this coating…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 10

Hi Ray! The MORryde GooseTech 5th Wheel to Gooseneck Pin Box for 11.5K to 14K Trailers #MR74MV can definitely be used in a short bed 3/4 ton pickup, like your 2024 Ram 2500. Just be aware that not all trailers have a tapered nose and you may not get…

view full answer...

Answer 11

Hey Paul! The PullRite SuperGlide #PUL43RR (2714) and #PUL73RR (2914) do weigh the same. The main difference is the capacity, which is going to come from the base of the 5th wheel hitch. Since your 2027 Keystone Cougar 316RLS has a GVWR of 12,900 lbs…

view full answer...

Compatibility of King Pin Tripod Stabilizer for 5th Wheel Trailer

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching