Does Lubed Dust Cap and Rubber Plug # DC250L-DCRP Have a Zerk Fitting to Add Grease
Published 09/20/2012
Question:
do these have a zerk fitting so you can add grease?
asked by: Scott D
0
Expert Reply:
No, dust cap # DC250L-DCRP, is just a hollow dust cap. The rubber plug on the end can be removed to access the zerk fitting on EZ lube axles. For a cap that you can use to fill in grease you will want to look at bearing protectors, see link.
expert reply by:
Michael H
0
Product Page this Question was Asked From
2-1/2" Lubed Dust Cap and Rubber Plug - 2.45" x 1.52" x 1.18" - Qty 1
- Trailer Bearings Races Seals Caps
- Caps
- EZ Lube Grease Cap
- 2.44 Inch O.D.
- 2.44 Inch
- 5200 lbs Axle
- 6000 lbs Axle
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Dometic Soft Start for Dometic B59516.711C0-MX
- Q&A: Length of Coleman-Mach Underbunk RV AC Power Cord
- Q&A: Which Caliper Should Be Used With The Dexter 9-3/4" Hub-and-Rotor Assembly DX82UR?
- Q&A: Length Of The Taskmaster Trailer Wheel Lug Nut # TA76QR
- Q&A: What Is The Tread Size For The # 42 Spindle?
- Q&A: Replacement Brakes, Hubs, Bearings and Seals for 2022 Conqueror UEV490
- Q&A: Replacement Bearings For A 6,000 Pound Dexter Axle
- Article: Trailer Wiring Diagrams
- Article: How to Raise Your Travel Trailer Height
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Gooseneck vs Fifth-Wheel Trailers
- Article: How Much Does a Boat and Trailer Weigh?