Replacement Wheel Stud 1/2" Diameter x 2" Long
Updated 06/23/2020 | Published 06/20/2020
Question:
I have a 1964 Fleetwood Terry 19 foot trailer with a missing wheel stud. What is the correct part? Appears to be 1/2 inch thread, spline size .69 inch ,about 2 inch long.
asked by: Gerald G
0
Expert Reply:
The Trailer Hub Wheel Stud part # 7-122 which measures 1/2" diameter x 2" long with a .62" spline length would be the best match option we have for you.
expert reply by:
Conner L
0
Product Page this Question was Asked From
Trailer Hub Wheel Stud - Drive In - 1/2" Diameter x 2" Long - Qty 1
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 1/2 Inch Diameter
- Drive-In Stud
- 2 Inch Long
- Redline
more information >
Continue Researching
- Shop: Trailer Hub Wheel Stud - Drive In - 1/2" Diameter x 2" Long - Qty 1
- Q&A: Trailer Hub Stud Recommendation for 5,200 lb Lippert Hub
- Q&A: How To Determine the Correct Size Lug Nuts For a Trailer
- Q&A: How Much Smaller Should Hole Be Drilled for Press-In Wheel Studs
- Shop: DeeMaxx Drive-In Wheel Stud - 1/2" Diameter x 2" Long
- Q&A: Recommended Trailer Hitch for a 2008 Chevrolet GS3500 Short Bus
- Q&A: What Size Trailer Rim Should be Used for a 205/75-15 Trailer Tire
- Q&A: Replacement Wheel Stud that is .545 Diameter and 1/2 - 20
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Article: Trailer Maintenance Schedule
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide